Seams on Knit Fabric by Hand
Hand sewing suits knit seams well. A hand stitch can be made as flexible as the fabric needs, and it is the natural choice for repairs, small pieces, and hand-knitted garments.
Why sew knits by hand
Hand sewing is often the best choice for knit fabric when the piece is small, the seam is short, or the fabric is too thick or too delicate for a machine. A repair on a sweater, a seam on a hand-knitted garment, and a join on a soft toy are all easier by hand than by machine. Hand sewing also gives full control over the tension of each stitch, which matters on a knit, since the seam must stretch without pulling the fabric out of shape. A machine can do the same job faster, but a hand-sewn seam can be just as strong and far neater on a small or awkward piece.
Hand-knitted pieces are usually joined by hand in any case, since the pieces are shaped by the knitting and the seam should follow their edges. A machine seam on a chunky knit can flatten the loops near the stitching, while a hand seam sits between the loops and leaves the texture alone.
Stitches that stretch by hand
The stitches used for knit seams by hand are the flexible ones. A backstitch gives a firm, strong seam and suits seams that carry weight, such as a shoulder or a side seam, though it uses more thread and can look stiff if it is sewn too tightly. A running stitch is quicker and lighter, and it suits seams that carry little load, but it can gap if the stitches are too long. A ladder stitch, also called a slip stitch, joins two folded edges invisibly from the outside and suits a seam that should not show, such as a lining or a closed opening.
For knitted pieces, a mattress stitch is the usual join. It works through the edge stitches of each piece and pulls them together into a nearly invisible seam, with the allowances folding to the inside. A whip stitch is quicker and suits seams that will be hidden, though it shows more on the outside. Whichever stitch is used, the key is to keep it loose enough to stretch: a hand stitch pulled drum tight will snap when the fabric moves, just as a straight machine stitch does.
Thread, needle, and preparation
Use a thread with some give for hand-sewn knit seams, since a thread with no stretch will snap under the same pull that breaks a machine straight stitch. A matching sewing thread suits fine knits, while the same yarn as the knitting suits hand-knitted pieces and gives a join that blends in. A needle with a blunt tip, such as a yarn needle or a tapestry needle, suits knitted pieces, since it slides between the loops instead of piercing them. A fine hand-sewing needle suits jersey and other fine knits.
Pin the pieces together before sewing, placing the pins across the seam line so they do not distort the fabric. Match the edges stitch for stitch on knitted pieces, so the seam does not pull one side longer than the other. If the pieces are different lengths, ease the longer one in evenly along the seam rather than gathering it at one end.
Sewing the seam by hand
- Thread the needle with a length of thread that is easy to handle, roughly the length of an arm, and knot the end.
- Start at one end of the seam and take the first stitches a little inside the edge, so the knot is hidden in the allowance.
- Work along the seam with even stitches, keeping each one the same length and the same tension.
- Keep the stitches loose enough that the seam can stretch: pull each stitch snug, not tight.
- Check the seam as it grows by stretching it gently across the stitching, the way the garment will stretch.
- Finish with a few small backstitches or a knot buried in the allowance, so the end does not unravel.
Work slowly and check often. A hand-sewn seam is easy to adjust while it is being sewn and hard to fix once it is finished, so a quick stretch test every few centimetres catches a too-tight section before it is sewn in.
Finishing and checking the seam
A hand-sewn knit seam rarely needs a separate finish, since the edges of knit fabric fray little and the hand stitches themselves hold the edge. On a fine knit that curls, a row of small whip stitches along the raw edge will tidy it. On a knitted piece, the allowances are usually left as they are, since the yarn does not unravel. When a seam will be seen from the inside, as on an unlined garment, the hand stitches can be worked neatly and evenly so the inside looks as cared for as the outside. Press the seam gently with steam, holding the iron above the fabric rather than pressing down on it, so the loops are not flattened.
Stretch the finished seam once more and look at it from the outside. It should lie flat, give without popping, and show little or no stitching. A seam that passes that check will hold through wearing and washing, and it will have been made with nothing more than a needle, a thread, and a steady hand. That simple kit is enough for a seam that moves the way knit fabric should.