The Seam Line How seams are made, finished, and fixed

Home / Seam Finishes: What They Are and How to Choose One

Seam Finishes: What They Are and How to Choose One

A seam finish is what happens to the raw edges of a seam after it is sewn. It stops them fraying, keeps the inside of a garment tidy, and helps the seam last.

What a seam finish is

When two pieces of fabric are sewn together, the cut edges of the seam allowances are left raw. On most fabrics, those edges fray in wear and in the wash, and the fraying can weaken the seam and make the inside of the garment look untidy. A seam finish deals with those edges. It may wrap them in thread, fold them under, bind them with a strip of fabric, or enclose them inside another seam. Some finishes are part of the seam itself, such as a French seam or a flat-felled seam, where the edges are enclosed as the seam is made. Others are added after the seam is sewn, such as overlocking, zigzag stitching or binding. The finish does not change the fit of the garment, but it changes how long the seam lasts and how the garment looks and feels from the inside. A garment with no finish at all is sometimes called unfinished, and it is usually only acceptable on a fabric that does not fray, or on a toile or a test garment.

The main finishes at a glance

Overlocking wraps the edge in thread with a serger, and it is fast and neat on most fabrics. Zigzag stitching does a similar job on a standard machine, wrapping the edge in a zigzag that stops fraying, though it is slower and less tidy than overlocking. A bound finish covers the edge with a strip of bias binding, which looks smart and suits jackets and unlined garments. A pinked finish trims the edge with pinking shears, which cuts a zigzag edge that frays less, though it is the lightest finish and suits fabrics that fray only a little. A turned and stitched finish folds the edge under and stitches it down, which is tidy and needs no special equipment. A French seam encloses the edges inside a second seam, and a flat-felled seam folds and topstitches them flat. Each finish has a place, and the choice depends on the fabric, the garment and the equipment available. No single finish suits every situation.

How fabric decides the finish

Fabric is the first thing to consider. A fabric that frays heavily, such as a loosely woven linen or a rayon, needs a finish that fully wraps or encloses the edge, such as overlocking, binding or a French seam. A fabric that frays a little, such as a stable cotton, can take a zigzag or a pinked finish. A fabric that does not fray, such as a felt or a bonded knit, may need no finish at all, though a light finish still tidies the inside. Sheer fabrics need a finish that does not show through, so a French seam or a narrow bound edge is often chosen. Thick fabrics need a finish that does not add too much bulk, so overlocking or a trimmed finish is better than binding. Knits need a finish that stretches with the fabric, so overlocking or a zigzag is preferred over a rigid turned edge. The weight, the weave and the stretch of the cloth all point toward a finish, and testing on a scrap shows how each finish looks and feels on that particular fabric.

How the garment decides the finish

The garment matters as much as the fabric. An unlined jacket shows its seams from the inside, so the finish needs to look good, and binding is often chosen for that reason. A lined garment hides its seams, so a faster finish such as overlocking is enough. A garment that will be washed often needs a finish that survives the wash, such as overlocking or a flat-felled seam, while a garment that will be dry cleaned can take a lighter finish. A child's garment, which is washed often and worn hard, needs a durable finish. A delicate blouse needs a finish that does not add bulk or show through. The position of the seam matters too: a seam in a visible place, such as the inside of an open jacket, deserves a smarter finish than a seam hidden inside a lining. The finish should match the standard of the garment as a whole, so a well made garment does not have a rough finish on its seams.

Equipment, time and skill

Equipment limits the choice. A serger makes overlocking fast and tidy, but without one, zigzag, binding, turning and stitching, and pinking are all possible on a standard machine. Time matters as well: overlocking and zigzag are quick, binding and French seams take longer, and a flat-felled seam takes the longest. Skill matters too, since binding and French seams need careful folding and pressing, while zigzag and overlocking are more forgiving. A beginner may start with zigzag or pinked finishes, then move to binding and French seams as confidence grows. There is no need to use the most elaborate finish on every seam; the right finish is the one that suits the fabric, the garment and the sewist, and that will hold up in wear.

Seam finishes have a history that follows the machines available at the time. Before the serger became common in home sewing, finishes such as binding, turning and French seams were the standard, because they could be done on a plain machine with an iron. The serger made overlocking fast and cheap, and it became the default finish on ready-made clothes, where speed matters. Home sewists now have both options, and the choice is no longer forced by equipment alone. A finish that was once used because there was no alternative is now chosen because it looks better or lasts longer. That history is useful to remember: a finish that seems old fashioned may still be the best choice for a particular fabric or garment, and a fast modern finish may not suit every situation.

A good way to learn finishes is to make a small sample book. Cut squares of the fabrics used most often, sew a seam in each one, and finish each seam with a different method, labelling the sample with the fabric, the finish and the stitch settings. Wash the samples with a normal load, then look at them: some finishes will have held, some will have frayed, and some will have puckered. The sample book becomes a reference that is more reliable than memory, because it shows how each finish behaved on each fabric. It also saves time on the next garment, since the finish can be chosen from the samples rather than tested again. Keep the samples flat, in a folder or a box, and add to them whenever a new fabric is used.

Start with the fabric, then think about the garment and what equipment is at hand. The finish that fits all three will keep the seams tidy, stop the edges fraying, and suit the standard of the garment.