The Seam Line How seams are made, finished, and fixed

Home / How to Choose a Seam Finish by Fabric

How to Choose a Seam Finish by Fabric

The fabric decides the finish more than any other factor. Its weight, its weave and its stretch point toward a finish that will hold, lie flat and look right.

Start with how the fabric frays

Hold a scrap and pull at the cut edge. A fabric that sheds threads easily needs a finish that fully covers the edge, while a fabric that holds its edge needs only a light finish. Loosely woven fabrics, such as linen, rayon and some wools, fray heavily, and a zigzag alone may not be enough to hold them through many washes. Tightly woven cottons fray less, and a simple finish often holds. Knits do not fray in the same way, because the loops hold together, but their cut edges can curl, and they need a finish that stretches. Sheer fabrics fray and show every finish through the cloth, so the finish must be both secure and discreet. Test the fraying on a scrap, wash the scrap if possible, and see how the edge behaves. That test is more useful than a general rule, because two fabrics with the same name can fray very differently depending on the weave and the finish applied to the cloth.

Light and sheer fabrics

For sheer and lightweight fabrics, such as chiffon, organza, voile and fine silk, the finish should be enclosed or narrow, so it does not show through. A French seam is the usual choice, because it encloses the raw edges inside a second seam and leaves no visible thread on the outside. A narrow bound finish, using a fine bias strip, is another option, though it adds a little more bulk. A rolled hem or a narrow overlock can work on a very light fabric, if the overlocking thread is fine and the stitch is narrow. Zigzag stitching is usually too visible on a sheer fabric, and a pinked edge is too rough, since the zigzag cut shows through. Pressing matters on sheers: a finish that is pressed flat and narrow looks tidy, while a wide or bulky finish draws the eye. Test the finish on a scrap held up to the light, since a finish that looks fine on the table may show clearly when the fabric is worn.

Medium-weight wovens

Medium-weight wovens, such as cotton poplin, chambray, lightweight denim and stable linen, take the widest range of finishes. Overlocking is fast and tidy, zigzag works well on a standard machine, and a bound finish looks smart on a garment that will be seen from the inside. A flat-felled seam suits these fabrics too, especially on shirts and workwear, where strength matters. A turned and stitched finish is tidy and needs no special equipment, and a pinked finish is enough on a cotton that frays only a little. The choice here is often about the garment rather than the fabric: an unlined jacket deserves binding, a shirt deserves a flat-felled or French seam, and an everyday dress can take overlocking or zigzag. The fabric does not force the choice, so the sewist can pick the finish that suits the garment and the time available. Test on scrap to check bulk and appearance, especially where several layers meet.

Thick and heavy fabrics

Thick fabrics, such as heavy denim, canvas, coating wool and upholstery cloth, need a finish that does not add bulk. Binding adds layers and can make a thick seam too bulky to press flat, so it is usually avoided on heavy cloth. A flat-felled seam works well on denim and canvas, because the fold is part of the seam and the fabric can take it. Overlocking works well too, since it wraps the edge without adding a fold, and it trims the edge at the same time. A pinked finish can work on a thick fabric that frays only a little, and a simple zigzag can hold the edge if the stitch is wide enough. The main risk on thick fabric is bulk at the joins, where several layers stack up, so the finish should be trimmed and pressed before the seam is finished. A seam that is too bulky will not lie flat, and it will pull the garment out of shape. Test the finish at a join on scrap, not just on a straight length.

Knits and stretch fabrics

Knits need a finish that stretches with the fabric. A rigid finish, such as a turned and stitched edge sewn with a straight stitch, can snap when the garment is pulled on, or it can pucker the seam. Overlocking is the usual choice for knits, because the overlock stitch stretches and the serger trims and finishes in one pass. A zigzag stitch on a standard machine is the next best option, since the zigzag gives a little. A flat-felled seam can work on a stable knit if it is sewn with a stretch stitch, but it is less common, because the fold adds bulk and the knit may not press crisply. A French seam is not suited to most knits, since the enclosed layers do not stretch well and the seam can feel stiff. When finishing a knit seam, use a ballpoint needle, test the stretch on a scrap after sewing, and check that the finish does not pucker when the fabric is stretched.

Colour and pattern can also influence the finish, though they matter less than weight and weave. On a plain fabric, every finish shows, so a tidy finish such as binding or a French seam is worth the time. On a busy print, a simpler finish such as overlocking or zigzag is less visible, and the time saved can be spent elsewhere on the garment. On a dark fabric, a light coloured thread will show clearly, so the thread should match the fabric unless a contrast is intended. On a light fabric, a dark thread will show through, especially on a sheer, so matching thread is important. These are small points, but they affect how the inside of the garment looks, and they are easy to check on a scrap before finishing the seams.

Test the fabric first, then match the finish to its weight, weave and stretch. A finish that suits the cloth will hold through washing, lie flat, and look as good on the inside as the garment looks on the outside.