The Seam Line How seams are made, finished, and fixed

Home / Seam Finish for Thick Fabrics

Seam Finish for Thick Fabrics

Thick fabric makes a seam bulky before any finish is added. The finish should hold the edge without adding layers, so the seam can still lie flat and press well.

Why bulk is the problem

Heavy denim, canvas, coating wool, upholstery cloth and thick fleece all add bulk at the seam, because each layer of fabric is thick and the allowance is two layers on top of the garment itself. A finish that adds another layer, such as binding, makes the seam thicker still, and the seam may not press flat, may pull the garment out of shape, and may be hard to sew through at the joins. The finish also needs to hold an edge that frays, since many thick fabrics are loosely woven and shed threads. The balance is to hold the edge securely while adding as little as possible. That usually means trimming the allowance, wrapping the edge in thread, or folding it in a way that is part of the seam itself. Test the finish at a join on scrap, where several layers meet, not just on a straight length, since the join is where bulk shows most.

Overlocking thick fabrics

Overlocking is often the best finish for a thick fabric, because it wraps the edge in thread and trims it at the same time, without adding a fold. The serger cuts the allowance to an even width and wraps it, so the edge is secure and the seam stays as flat as the fabric allows. The stitch should be tested on scrap, since a serger set for a light fabric may not trim a thick fabric cleanly, and the tension may need adjusting. On a very thick fabric, the serger may struggle, and a zigzag on a standard machine may be easier, though it is slower. The overlocked edge should be pressed to one side where possible, so the bulk is spread, and the seam should be pressed with steam and a firm hand, then left to cool flat. Overlocking suits heavy denim, canvas and coating wool, where the edge needs to be held but the seam must not grow thicker.

Flat-felled and trimmed finishes

A flat-felled seam works well on thick fabrics such as denim and canvas, because the fold is part of the seam and the fabric can take it. The seam is strong, it lies flat, and the edges are enclosed, so there is no need for a separate finish. The trimming step in a flat-felled seam reduces bulk, since one allowance is cut shorter before the other is folded over it. A trimmed finish, where the allowance is cut narrower and then zigzagged or pinked, is another way to reduce bulk on a thick fabric. Cutting the allowance narrower before finishing means there is less fabric to press flat, and the seam sits better. A pinked finish can work on a thick fabric that frays only a little, since the zigzag cut holds the edge without adding thread. Each of these finishes trades a little time for a flatter seam, and on a thick fabric that trade is worth it.

Finishes that add too much bulk

Binding is the finish most likely to add too much bulk on a thick fabric. The binding strip, folded over the edge, adds two more layers, and on a heavy cloth the result is a ridge that will not press flat. A turned and stitched finish also adds a fold, and on a thick fabric the fold may be too stiff to stitch through cleanly. A French seam adds layers too, and it is usually too bulky for a heavy fabric, though it can work on a medium-weight wool. A double layer of zigzag, sewn to hold a fraying edge, can also add stiffness. The finishes to avoid are the ones that fold the edge under or cover it with a strip, and the finishes to choose are the ones that wrap or trim the edge. If a finish looks bulky on a scrap, it will be bulkier on the garment, especially at the joins.

Pressing and sewing thick seams

Press thick seams with steam, a firm hand and a tailor's clapper or a heavy book left on the seam while it cools, since the heat and the weight help the fibres to settle flat. Use a needle suited to the fabric, and a stitch length a little longer than for a light fabric, so the stitches do not perforate the cloth. At a join, where several layers meet, slow down and turn the handwheel for a few stitches, rather than forcing the fabric through, since forcing it can bend the needle or skip stitches. A hump jumper or a folded piece of card under the back of the presser foot can help the machine over a thick spot. Trim the allowances at the joins before finishing, so the bulk is reduced where it matters most. Press the finished seam from both sides, and check that it lies flat before moving on.

Thick fabrics are often used for outerwear, bags and upholstery, where the seams take more stress than on a light garment. A coat seam, for example, is pulled when the coat is put on and taken off, and a bag seam is pulled when the bag is carried. The finish should therefore help the seam to hold, not just stop it fraying. Overlocking holds the edge, a flat-felled seam adds strength, and trimming the allowance reduces the bulk that would otherwise pull the seam out of shape. The finish should be chosen with that stress in mind, and the seam should be tested on scrap by pulling it firmly, to see whether the finish holds. A finish that looks tidy but pulls apart under stress is not a good finish for a thick fabric garment.

On thick fabric, the finish should hold the edge and stay out of the way. Overlock, trim, or use a flat-felled seam, press with steam and weight, and test at a join on scrap before finishing the garment.