Seam Types: A Guide to the Main Kinds
A seam is the join between two pieces of fabric. The main seam types differ in how the pieces are arranged, how the raw edges are handled, and what the finished seam looks like.
What a seam is, and what it is not
A seam is the join itself, while a stitch is the individual loop of thread that forms the join. The seam is the line where two pieces meet and are held together. The stitch is the means of holding them. That distinction matters when reading about seam types, because the type describes the arrangement of the fabric, not the stitch used to sew it. The same stitch can appear in several seam types, and one seam type can be sewn with more than one stitch.
Seam types are grouped by construction. In the standard classification, superimposed seams are class 1, lapped seams are class 2, bound seams are class 3, and flat seams are class 4. Those four classes cover the main families, and most named seams, such as the French seam or the flat-felled seam, are variations within one of them. This guide covers the main kinds in plain terms, and the classification is explained in full in the guide to the standard classes.
Choosing a seam type means weighing strength, bulk, appearance, and how the raw edges are treated. A seam inside a garment that will never be seen can be simple and strong. A seam on sheer fabric must hide its raw edges, because they show through. A seam on a heavy coat must lie flat under thick layers. No single type suits every case.
Superimposed seams: the plain seam
Superimposed seams are the plain seam, the most common seam in sewing. Two layers are placed face to face and stitched a set distance from the raw edges. The allowance is then pressed open or to one side, and the raw edges are finished to stop fraying.
The plain seam is quick, strong enough for most garments, and easy to adjust, because the allowance is there to let out or take in. Its weakness is the raw edge. Left unfinished, the edge frays, and on fabrics that fray easily the seam weakens over time. Finishes such as overlocking, zigzag stitching, binding, or pinking solve that, and the choice of finish depends on the fabric and on whether the inside will be seen.
Most garment seams are superimposed seams. Side seams, shoulder seams, and sleeve seams on ordinary clothing are usually plain seams with a finished edge, and that combination covers a large share of everyday sewing.
Enclosed seams: raw edges hidden inside
Enclosed seams hide the raw edges inside the seam itself. The French seam is the best known example. It is stitched in two passes: first narrow with wrong sides together, then wider with right sides together, so the raw edges end up enclosed in a fold of fabric. No raw edge is left exposed, and no separate finish is needed.
Enclosed seams suit sheer and lightweight fabrics, where a raw edge would show through, and unlined garments, where the inside is visible when the garment is worn or handled. They are also used on items that are washed often, such as pillowcases, because there is no raw edge to fray in the wash.
The trade off is bulk and curve handling. An enclosed seam carries extra layers of fabric, and it does not suit tight curves or heavy fabrics. It also needs care with allowance, since the two passes split the total allowance between them.
Lapped and welt seams
Lapped seams overlap one edge over the other. One piece is laid over the other so the edges overlap, and the stitching goes through the overlap. The raw edge of the top piece is usually folded under first, so no raw edge shows on the right side. Lapped seams lie flat, which suits fabrics that are hard to press open and garments where a flat join matters.
Welt seams are a lapped variant used on heavy fabrics. The overlap is wider, and the seam is often topstitched, which gives a strong, flat join that stands up to wear. Welt seams appear on coats, heavy jackets, and upholstery, where strength and a flat finish matter more than a soft hand.
Both types need accurate overlapping. If the overlap is uneven, the stitching line wanders and the seam looks untidy. Marking the overlap line and pinning or basting before stitching keeps it even.
Bound and flat seams
Bound seams wrap the raw edges in a strip of fabric or binding. The binding encloses the edges completely, which gives a tidy finish on fabrics that fray and on garments where the inside is meant to look as good as the outside, such as an unlined jacket. Binding adds a step and a little bulk, but it is one of the neatest finishes available.
Flat seams join two edges without overlapping them in the usual way. The pieces are butted or lapped flat and stitched so the seam lies almost flat against the fabric. Flat seams are used on knitwear and activewear, where a raised seam would rub against the skin, and on leather, where a bulky seam would be stiff and hard to press.
Decorative seams: stitched to show
Decorative seams are stitched to show. The stitching sits on the right side of the fabric as part of the design, rather than being hidden inside. Topstitching along a seam, a corded seam, or a seam with a contrasting thread all count as decorative, and they are chosen for how they look as much as for how they hold.
A decorative seam still has to function as a join. The visible stitching is usually added to a sound seam underneath, such as a plain seam pressed open and then topstitched from the right side. The decoration is the outer layer, and the join underneath does the structural work.
Jeans are the familiar example. The seams are strong flat-felled seams, and the golden topstitching is decorative as well as functional, holding the folded allowance down while giving the garment its look. The same idea appears on jackets, bags, and shirts, wherever a seam is meant to be seen.
How to choose
Start with the fabric. Sheer fabric points toward an enclosed seam. Heavy fabric points toward a welt or lapped seam. Knit fabric points toward a flat seam or a stretch stitched plain seam. Fraying fabric points toward a bound seam or a finished plain seam.
Then consider the use. A seam that takes stress, such as a jeans inseam or a bag handle join, needs the strength of a flat-felled or welt seam. A seam that will be seen, such as a jacket front edge, may need a bound or decorative treatment. A seam inside an unlined garment needs a finish that looks tidy.
The main kinds are few, and the choice among them is usually clear once fabric and use are known. Learn the plain seam first, add the French seam for sheers, the flat-felled seam for hard wear, and the bound seam for tidy insides, and most projects will have a suitable seam ready.