The Seam Line How seams are made, finished, and fixed

Home / Enclosed Seams

Enclosed Seams

An enclosed seam hides its raw edges inside the seam. Nothing frays, nothing shows through sheer fabric, and the inside looks as tidy as the outside.

What makes a seam enclosed

A seam is enclosed when the raw edges are wrapped inside the seam structure, so no cut edge is left exposed. The seam is the join itself, while a stitch is the individual loop of thread that forms the join, and in an enclosed seam the stitches and the folds work together to trap the raw edges between layers of fabric.

The idea is simple and the execution varies. In a French seam, the raw edges are enclosed by stitching twice, with the second stitch wider than the first. In a mock French seam, the raw edges are folded under and stitched down. In a bound seam, a strip of fabric wraps the edges. In each case the result is the same: the cut edge is inside, protected from fraying and from view.

Enclosed seams are chosen for appearance and for durability in the wash. A raw edge that is hidden cannot fray, and a seam with no exposed edge looks finished from both sides. That makes enclosed seams the natural choice for unlined garments and for items that are washed often.

The French seam

The French seam is the best known enclosed seam. It is stitched in two passes. The first pass joins the pieces with wrong sides together at a narrow allowance, often 1/4 inch. The seam is pressed, the pieces are turned so the right sides are together, and the second pass is stitched at a wider allowance, often 3/8 inch, which encloses the raw edges from the first pass inside a fold.

The total allowance is the sum of the two passes, so a 1/4 inch first stitch plus a 3/8 inch second stitch gives a total of 5/8 inch, which matches the usual garment allowance. Common pattern allowances are 5/8 inch (1.5 cm) for garments and 1/4 inch for quilting, but allowances vary, so the pattern should always be checked before cutting, and a French seam pattern usually states its own split.

French seams suit sheer and lightweight fabrics such as chiffon, organza, and fine cotton, where a raw edge would show through. They also suit pillowcases, children's clothing, and unlined blouses. They do not suit tight curves or heavy fabrics, where the extra layers create bulk that resists pressing.

The mock French seam

The mock French seam, sometimes called a false French seam, gives a similar look with a simpler method. The pieces are joined with a plain superimposed seam, the allowance is pressed open, and each raw edge is folded under and stitched down. The result looks tidy from the inside, with no raw edge showing, though the construction is not a true enclosed seam.

The mock version is useful on curves, where a true French seam is hard to sew because the second pass has to follow a curve while enclosing the first. It is also useful when the fabric is slightly too heavy for a true French seam but still needs a tidy inside. The trade off is that the folded edges are held by a line of stitching that can come undone, while a true French seam traps the edges in a fold that is stitched through.

Bound seams and other enclosed kinds

A bound seam encloses the raw edges in a strip of binding. The binding is wrapped around the allowance and stitched in place, either by machine or by hand. It gives a very tidy finish and it suits fabrics that fray, since the binding protects the edge completely. It is common in unlined jackets, where the inside is meant to look as good as the outside.

A flat-felled seam is enclosed in a different way. One allowance is folded over the other and stitched down, so no raw edge is exposed on either side. It is the strong seam on jeans and work shirts, and it counts as enclosed because the raw edges end up inside the fold, even though its main purpose is strength rather than appearance.

Hong Kong seams, where each raw edge is bound separately with bias binding before the seam is pressed open, are another enclosed finish. Each edge is protected, the seam presses open flat, and the binding shows as a neat strip on the inside. It is a couture finish, slower than a French seam, and it suits jackets and coats where the inside is on show.

When to choose an enclosed seam

Choose an enclosed seam when the raw edge would be a problem. Sheer fabric is the clearest case, since any raw edge shows through. Unlined garments are the next, since the inside is visible when the garment is worn, handled, or turned. Items washed often, such as pillowcases and children's clothes, benefit because there is no edge to fray in the wash.

Do not choose an enclosed seam for heavy fabric, tight curves, or seams that need to be let out later. The extra layers add bulk that heavy fabric cannot absorb, the second pass fights a tight curve, and an enclosed seam cannot be let out, because the allowance is folded inside the seam rather than lying free. A plain seam with a finished edge is the better choice in those cases.

Pressing matters more than usual with enclosed seams. The first pass of a French seam should be pressed flat before the second pass, and the finished seam should be pressed to one side so it lies smooth. A poorly pressed enclosed seam looks lumpy, and the lump shows on the right side of a light fabric.

Enclosed seams reward patience. They take longer than a plain seam, they need the allowance split planned before cutting, and they ask for careful pressing. In return they give a seam that looks finished from both sides, survives washing without fraying, and lets sheer fabric stay sheer. That is a fair trade on the projects they suit, and a poor one on the projects they do not.