The Seam Line How seams are made, finished, and fixed

Home / Mock French Seam: What It Is and How to Sew It

Mock French Seam: What It Is and How to Sew It

A mock French seam looks like a French seam from the outside, but it is sewn as a plain seam first, with the raw edges folded under and stitched down in a second step.

What a mock French seam is

A mock French seam, sometimes called a false French seam, is a seam that imitates the appearance of a true French seam without using the two pass method. It starts as a plain seam, sewn with right sides together in the normal way. Then the seam allowances are pressed open, each raw edge is folded under, and the folded edges are stitched down, one at a time or together. The result is a seam with no exposed raw edges and a tidy finish on the wrong side, much like a true French seam.

The difference is in the construction. A true French seam encloses both raw edges together inside a single fold, with two lines of stitching. A mock French seam encloses each raw edge separately, folding each allowance under and stitching it down. From the right side, the two look almost the same: a plain straight seam with no visible finishing. From the wrong side, the mock version shows two narrow folded edges lying flat, where the true version shows a single enclosed ridge.

The mock seam exists because the true French seam has limits. It struggles on tight curves, on thicker fabrics, and where a seam needs to be opened later for alteration. The mock version handles all three better, because the allowances are pressed open and folded separately, which gives the seam more flexibility around a curve and more room to cope with bulk.

When to choose the mock version

Curved seams are the best reason to choose a mock French seam. An armhole, a sleeve cap or a neckline curve fights the enclosed fold of a true French seam, but a mock seam follows the curve easily, because each allowance is folded under on its own and the seam is pressed open. The result is a neat enclosed finish on a curve that a true French seam would pucker.

Thicker fabrics are another good reason. A light to medium cotton, a linen or a lightweight wool that is too thick for a true French seam can still take a mock version, because the allowances are pressed open and folded flat rather than stacked into a single tube. The finish is less bulky, and the seam lies flatter, which suits fabrics that would puff up in a true French seam.

Alterations are a third reason. A true French seam is hard to open, because both passes have to be unpicked and the enclosed fold has to be undone. A mock French seam is easier to open, because the folded edges can be unpicked and the plain seam underneath can be let out or taken in.

How to sew a mock French seam

  1. Sew a plain seam with right sides together, using the pattern allowance, and press the seam open.
  2. Trim the allowances if needed, then fold each raw edge under by a small amount and press the folds flat.
  3. Stitch each folded edge down close to the fold, working on the wrong side of the garment.
  4. Press the finished seam flat from the wrong side, then check the right side for a clean line.

The plain seam at the start is sewn exactly as a normal seam, which makes the method familiar to anyone who can sew a straight seam. Pressing it open is the next step, and it matters, because the allowances need to lie flat before their edges are folded under. A firm press with steam sets the seam open and makes the folding easier.

Folding each raw edge under is the step that needs care. The fold should be even along the whole seam, and it should be wide enough to hide the raw edge completely. Pinning the folds in place before stitching helps, especially on a long seam. The stitching that holds the folds down should run close to the fold, so the folded edge cannot flip up, but not so close that it misses the fold and leaves the edge loose.

There is a variation where both folded edges are stitched down together, with the seam pressed to one side instead of open. This gives a finish closer to a true French seam in appearance, with a single ridge on the wrong side. It is slightly bulkier, but it is quicker, because it needs only one line of stitching instead of two.

Appearance and durability

From the right side, a mock French seam is almost indistinguishable from a true French seam. Both present a plain straight seam with no visible finishing. From the wrong side, the mock version shows two flat folded edges, which look tidy and deliberate, though they are flatter and wider than the single ridge of a true French seam. On a sheer fabric, the mock version can show slightly more through the fabric, because the allowances are spread out rather than stacked, so a true French seam still has the edge on very sheer cloth.

Durability is good. The folded edges are stitched down, so they cannot fray, and the plain seam underneath carries the strain. The seam is not as strong as a flat-felled seam, but it is strong enough for light and medium weight garments in normal wear.

The seam is also comfortable. The folded edges lie flat against the fabric, so there is no ridge pressing against the skin and no scratchy overlocked edge. On a garment worn next to the body, such as a blouse or a child's dress, the mock French seam feels much like the true version.

Mock French seam vs the real one

The true French seam is the neater finish on sheer and very light fabrics, where its narrow enclosed ridge shows least through the cloth. It is also the more traditional choice for fine dressmaking, where the single ridge is part of the expected finish. The mock version is the more flexible finish, handling curves, thicker fabrics and alterations better, and it is the easier of the two to sew, because it starts with a familiar plain seam.

Speed is similar, though the mock version can be quicker on a curved seam, because there is no struggling with the fold around the curve. On a straight seam in light fabric, the true version is often quicker, because its two passes are straightforward and there is no folding of separate edges to pin and stitch.

Choosing between them comes down to the seam and the fabric. A straight seam in sheer fabric calls for the true French seam. A curved seam, a thicker fabric, or a garment that may be altered calls for the mock version. Sewing a sample of each on a scrap of the fabric in question shows the difference clearly, and the sample takes only a few minutes to make.