Superimposed Seams
A superimposed seam is the plain seam. Two layers are placed face to face, stitched, and the allowance is pressed open or to one side. It is the seam most sewing starts with.
What superimposed means
Superimposed seams are the plain seam, the first class in the standard classification, where two layers are placed face to face and stitched a set distance from the raw edges. The word superimposed describes the arrangement: one layer lies on top of the other, right sides together, and the stitching goes through both.
A seam is the join itself, while a stitch is the individual loop of thread that forms the join. In a superimposed seam, the stitches run along a line a set distance in from the raw edges, and that distance is the seam allowance. A garment pattern usually gives 5/8 inch (1.5 cm) and a quilt pattern 1/4 inch, yet those amounts are not fixed, so the pattern should be checked before cutting.
The plain seam is the base for many other seams. A French seam starts as a superimposed seam stitched narrow and then enclosed. A flat-felled seam starts as a superimposed seam and then folds one allowance over the other. Learning the superimposed seam well makes those variations easier, because the first step is the same.
How to sew one
Place the pieces right sides together, matching the raw edges and any notches or marks. Pin across the seam line, with pins at right angles to the edge, so the layers do not shift while sewing. Pinning at right angles also means the machine can sew over a pin without deflecting the needle, though removing pins as they approach the foot is the safer habit.
- Line the raw edge up with the guide mark for the allowance, such as the 5/8 inch line on the throat plate.
- Stitch from one end to the other at an even pace, keeping the raw edge on the guide line.
- Backstitch a few stitches at the start and the end to lock the seam, unless the seam will be crossed by another seam.
- Remove the pins as they reach the presser foot.
- Press the seam flat as sewn, then press the allowance open or to one side as the pattern directs.
Keeping the allowance even matters more than speed. A seam that drifts wider or narrower changes the size of the finished piece, and the next piece will not match it. A guide on the machine bed and a steady pace are the two things that keep the distance constant.
Pressing and finishing
After stitching, the seam is pressed flat as sewn to settle the stitches. Then the allowance is pressed open, with each side flat against its own piece, or to one side, with both layers folded together. Pressing open spreads the bulk evenly and suits straight seams on medium weight fabric. Pressing to one side suits seams that will be topstitched, graded, or joined to another seam, and it is the usual choice for quilt blocks.
The raw edges need a finish to stop fraying. Common finishes for a superimposed seam include overlocking, zigzag stitching, binding, pinking, and turning the edge under and stitching it. The finish should be chosen before stitching when it needs allowance width to work, since an overlocked edge needs enough allowance for the overlocking to catch the fabric.
On curved seams, the allowance needs clipping or notching before pressing. Small snips into the allowance on an outward curve let it spread, and small wedges cut out on an inward curve let it fold without bunching. Both cuts stop short of the stitching line.
Where the plain seam is used
Superimposed seams are used wherever a simple, strong join is needed and the raw edge can be finished separately. Side seams, shoulder seams, sleeve seams, centre seams, and waist seams on ordinary garments are usually superimposed seams. Quilt blocks are joined with superimposed seams at a 1/4 inch allowance. Cushions, bags, and simple home items use them throughout.
The plain seam is also the seam used for fitting. Because the allowance lies free, a superimposed seam can be let out or taken in within the width available. A garment fitted with superimposed seams stays adjustable until the final pressing, which is one reason patterns use this seam for the seams most likely to need fitting changes.
Strengths and limits
The strengths of the superimposed seam are speed, simplicity, and adjustability. It is quick to sew, easy to press, and easy to unpick and redo. It suits most fabrics and most garments, and it is the seam a beginner should learn first.
Its limits are the raw edge and the bulk. Left unfinished, the edge frays, and on fabrics that fray easily the seam weakens. On heavy fabrics, a pressed open allowance creates a ridge that can show on the right side, and grading or a different seam type may be needed. On sheer fabrics, the raw edge shows through, so an enclosed seam is the better choice.
A superimposed seam is only as good as its pressing. A seam stitched well and pressed carelessly looks worse than a seam stitched plainly and pressed with care, so give the iron the same attention as the machine.
The plain seam is ordinary, and that is its value. It does the most common job in sewing with the least fuss, and it leaves room to adjust, to finish, and to build more complex seams on top of it. Sew it evenly, press it well, finish the edge, and it will hold for the life of the garment.