The Seam Line How seams are made, finished, and fixed

Home / Seam Types in Garments

Seam Types in Garments

A garment is a map of seams. Each seam sits where it does for a reason, and the type chosen for it follows the fabric, the stress, and whether it will be seen.

Where the plain seam goes

The plain seam, also called a superimposed seam, does most of the work in a garment. Two layers are placed face to face and stitched, and the allowance is pressed open or to one side with the raw edges finished. Side seams, shoulder seams, sleeve seams, and centre seams on ordinary garments are usually plain seams.

The plain seam suits these places because it is quick, it adjusts easily, and it presses flat. A side seam that needs letting out or taking in can be moved within the allowance, which is why garment patterns give a 5/8 inch allowance on these seams. Garment patterns most often allow 5/8 inch (1.5 cm) and quilt patterns 1/4 inch, but the amounts differ by pattern, so check before cutting.

The finish on a plain garment seam depends on the fabric and on whether the inside will be seen. An overlocked finish is common in ready made clothing. A bound finish appears in unlined jackets. A zigzag finish is the usual choice for home sewing when no overlocker is available.

Seams that take stress

Some garment seams take more stress than others. An inseam on trousers, a crotch seam, an underarm seam, and the seat seam on a fitted garment all take strain when the wearer moves or sits. Those seams need a type and a stitch that hold under pull.

The flat-felled seam is the usual answer for hard wear. One allowance is folded over the other and stitched down, giving two lines of stitching and no exposed raw edge. It is the seam on jeans inseams and on work shirts, and it stands up to washing and movement better than a plain seam with the same thread.

Stitch length matters on stressed seams too. A shorter stitch gives more loops per inch and a stronger join, but a stitch that is too short perforates the fabric and weakens it. A medium stitch, a strong thread suited to the fabric, and a seam type that spreads the load are the combination that holds.

Seams that shape the garment

Some seams exist mainly to shape. A princess seam runs from the shoulder or armhole over the bust and down the front of a bodice, shaping it without darts. A yoke seam joins a shaped upper piece to a straighter lower piece, giving shape at the shoulders, the bust, or the hips. A waist seam joins a bodice to a skirt and sets the waistline.

These shaping seams are usually plain seams in construction, but they are sewn with care because their line is visible from the outside. A princess seam that wanders by a small amount changes the look of the whole bodice, so it is pinned or basted carefully and stitched slowly. The allowance is pressed toward the back or to one side as the pattern directs, so the seam lies smooth over the curve.

Darts are not seams, though they are sometimes confused with them. A dart is a fold stitched to a point that takes in fullness. A princess seam is a join between two pieces. Both shape a garment, but only the seam joins separate pieces.

Seams on sheer and light garments

Sheer garments need seams whose raw edges do not show through the fabric. The French seam is the usual choice. It is stitched in two passes so the raw edges are enclosed inside a fold, and the finished seam is narrow and tidy from both sides.

On a sheer blouse or dress, French seams are used for the side seams, the shoulder seams, and the sleeve seams. The allowance is split between the two passes, often 1/4 inch first and 3/8 inch second. The seam is pressed to one side, usually toward the back, and it needs no separate finish.

Mock French seams, which are a plain seam with the raw edges folded under and stitched, appear where a true French seam is hard to sew, such as on a curve. They give a similar look with less bulk, though the finish is less secure than a true enclosed seam.

Seams on heavy garments

Coats and heavy jackets use seams that lie flat under thick layers. A welt seam, which is a lapped variant used on heavy fabrics, overlaps one edge over the other and topstitches it down. It is strong, it lies flat, and it does not add the bulk of a pressed open allowance in thick cloth.

Lapped seams appear on coats for the same reason. One edge overlaps the other, the raw edge of the top piece is folded under, and the stitching goes through the overlap. The result is a flat join that presses well and does not create a ridge under a lining.

Bound seams also appear on heavy garments, in particular where the inside is visible. A bound seam wraps the raw edges in binding, which gives a tidy finish and stops fraying in a fabric that would otherwise shed fibres into the lining.

Seams that are meant to be seen

Some garment seams are decorative as well as structural. Topstitching along a seam line, in a matching or contrasting thread, holds the allowance flat and gives the garment a finished look. It appears on shirt collars and cuffs, on jacket edges, on jeans, and on bags.

Decorative stitching is usually added to a sound seam underneath, such as a plain seam pressed open and then topstitched from the right side. The visible stitching is the outer layer, and the join underneath does the structural work. A decorative seam that is also the only stitching holding the pieces together is a weak seam, however good it looks.

The seam types in a garment are chosen one place at a time, and the pattern is the record of those choices. Reading a pattern with an eye for why each seam is the type it is turns a list of instructions into a map of the garment, and it makes the next pattern easier to read, because the same decisions appear in the same places.