The Seam Line How seams are made, finished, and fixed

Home / Pressing Seams Open vs to One Side

Pressing Seams Open vs to One Side

Every seam is pressed either open, with the allowances spread apart, or to one side, with both allowances folded together. The choice affects how flat the seam lies, how strong it is, and how it looks from the outside.

What pressing open means

Pressing a seam open means opening the two seam allowances apart, one to each side of the seam line, and pressing them flat. The seam itself becomes a thin, flat line with a single layer of fabric on each side. This is the flattest way to press a seam, and it is the usual choice for garments, because it keeps the seam from adding bulk and it lets the garment hang smoothly. Most dressmaking patterns assume seams will be pressed open, and the construction often depends on it, since the next steps may need the allowances spread out of the way.

An open seam also makes it easier to match seams at crossing points, because the allowances can be pressed in opposite directions where two seams meet, which reduces the bulk at the join. This is sometimes called nesting, and it is one reason dressmakers favour open seams on fitted garments with many intersecting seams.

What pressing to one side means

Pressing to one side means folding both seam allowances together in the same direction and pressing them flat as a pair. The seam is slightly bulkier, because two layers of allowance sit together on one side, but the seam is also held more firmly, since the two allowances support each other. Quilters press most seams to one side, usually toward the darker fabric, so the allowance does not show through light fabric, and so the seams nest together when blocks are joined. In garments, seams are pressed to one side when they will be topstitched, enclosed inside a lining, or sewn in a way that needs the allowances together, such as a flat-felled seam.

Pressing to one side is also the practical choice when the seam is short and the allowances are too small to open neatly, or when the fabric is thick and the open allowances would splay outwards instead of lying flat.

How to press a seam open

  1. Lay the seam flat on the board with the right side down.
  2. Open the two allowances apart with your fingers, and finger press the fold.
  3. Place the iron on the seam, hold it for a few seconds, and lift it straight up.
  4. Work along the seam in sections, lifting and lowering the iron each time.
  5. Leave the seam to cool flat before moving the fabric.

A seam roll under the seam helps here, because it supports the seam itself while the allowances hang free on either side. Without support, the edge of the allowance can press a ridge into the right side of the fabric, which shows as a line running alongside the seam.

How to press a seam to one side

  1. Lay the seam flat and fold both allowances together toward the chosen side.
  2. Finger press the fold so the allowances lie smoothly in the same direction.
  3. Press with the iron lifted and lowered, working along the seam in sections.
  4. Check from the right side that the seam line is straight and the allowances are not peeking out.
  5. Leave the seam to cool before moving it.

Choosing the side matters. In quilting, the usual rule is to press toward the darker fabric, so the allowance does not show through the lighter one. In garments, the pattern or the construction usually decides: a seam that will be topstitched is pressed toward the side the topstitching will sit on, and a seam inside a lining is pressed away from the body of the garment.

Deciding which method to use

The decision depends on the fabric, the construction, and the finish that is wanted. Light fabrics and fitted garments usually suit open seams, because flatness matters most. Quilt tops, heavy fabrics, and seams that will be topstitched usually suit pressing to one side, because strength and nesting matter more than absolute flatness. A curved seam is easier to press open, because the allowances on a curve need to spread apart to lie flat. A straight seam in a thick fabric may press better to one side, because opening the allowances can make them splay outwards.

Consistency within a piece matters too. Pressing one seam open and the next to one side, without a reason, makes the finished piece uneven, because the seams will not sit at the same level. Decide the method for each seam as it is sewn, and keep it consistent across the parts that meet each other.

Where two seams cross, the choice matters even more. Pressing the allowances in opposite directions at the crossing lets them nest together, so the join lies flat instead of forming a lump. On a quilt top, this nesting is what makes the points of the blocks match. On a garment, it is what keeps a waist seam or a yoke seam from bulging where it meets a side seam. When the crossing is planned before the seams are pressed, the allowances can be set in opposite directions as each seam is done, and the join takes care of itself.

On small garments, like children's clothes, the choice is often made by the size of the seam. Short seams with narrow allowances are hard to press open, because the allowances are too small to spread neatly and too stiff to lie flat. Pressing them to one side is simpler and gives a smoother result. The same applies to doll clothes and other tiny pieces, where the iron is larger than the seam itself. In those cases the practical method wins over the usual rule, and pressing to one side is the sensible choice.

Both methods are correct, and neither is better in general. The skill is in choosing the one that suits the seam in front of you, and in pressing it properly once the choice is made.