Leather Seam Stitching
Stitching on leather is visible, decorative, and structural all at once. It needs a wedge shaped needle, a strong thread, and a stitch length kept longer than on cloth, so the leather is not perforated along the seam.
The needle
The needle for leather is a wedge shaped needle, often called a leather point needle. Its tip is shaped like a small chisel, and it cuts a clean slit in the leather rather than punching a round hole. The slit closes around the thread, which gives a neat stitch and a strong seam.
A round point needle, the kind used on cloth, is not a good choice for leather. It pushes the leather fibres aside instead of cutting them, which leaves a larger hole and a weaker seam. On a thick leather, a round point needle can also bend or break, since it has to force its way through firm material.
Needle size should match the thickness of the leather and the thread. A thin leather needs a smaller needle, and a thick leather needs a larger one. A needle that is too large for the leather leaves oversized holes. A needle that is too small can bend or break, and it may not carry a thick thread through the leather cleanly. Test the needle on a scrap before sewing the item.
The thread
Thread for leather is stronger and thicker than thread for cloth. A bonded polyester or nylon thread is the usual choice, since it is strong, smooth, and resistant to wear and sunlight. The thread has to hold a firm material under stress, and a fine cotton thread made for cloth is not strong enough.
Thread colour matters on leather, because the stitching is visible. A matching colour gives a discreet seam, while a contrasting colour makes the stitching a design feature. Both are used on leather goods: a matching thread on a tailored jacket, a contrasting thread on a bag or a belt. The choice is a design decision, and it should be made before the seam is sewn.
Thread thickness should match the leather and the needle. A thick thread on a thin leather looks heavy and can pucker the seam. A thin thread on a thick leather looks weak and may not hold. Test the thread on a scrap, and check that it passes through the needle eye cleanly and forms an even stitch.
Stitch length
Stitch length on leather is kept longer than on cloth. A short stitch perforates the leather, like a row of holes in paper, and the seam can tear along the perforation. A longer stitch leaves more leather between each hole, which keeps the seam strong. The exact length depends on the thickness of the leather, but it is always longer than the stitch length used on a comparable cloth.
On a thin leather, a stitch length of about 3 millimetres is a workable starting point. On a medium leather, 3.5 to 4 millimetres is common. On a thick leather, the stitch may be longer still. These are starting points, not rules: test the length on a scrap, and choose the length that looks even and holds firmly without perforating the leather.
Stitch length also affects the look of the seam. A longer stitch gives a bolder, more visible line, which suits a bag or a belt. A shorter stitch gives a finer line, which suits a garment. The length should suit both the strength needed and the look wanted.
Stitch types on leather
A straight stitch is the main stitch used on leather seams. It is strong, simple, and easy to sew evenly. Most leather seams, plain, lapped, or French, are sewn with a straight stitch. The stitching should be even, with the same length on every stitch, and the seam should run straight along the marked line.
Topstitching is a straight stitch sewn on the outside of the item, close to the seam, to hold the allowance flat and add a decorative line. Topstitching is common on leather jackets, bags, and belts, and it is often sewn in a contrasting thread. It should be sewn slowly and evenly, since it is fully visible.
A saddle stitch, sewn by hand with two needles, is used on fine leather goods where a hand sewn seam is wanted. It is stronger than a machine stitch, since each stitch is locked by two threads, and it has a distinctive look. A saddle stitch is slow, but on a small item such as a wallet or a belt, it is the traditional choice.
Machine settings
Tension should be balanced so the stitching lies flat on both sides. If the tension is too tight, the thread pulls the leather together and puckers the seam. If it is too loose, the stitching loops on the surface. Test the tension on a scrap, adjusting a little at a time, until the stitching is even on both sides.
Presser foot pressure should be set so the foot holds the leather without crushing it. Too much pressure can mark the leather and make it stick to the foot. Too little pressure lets the layers shift. A walking foot, a Teflon foot, or a roller foot helps the leather feed evenly, and any of the three is better than a standard foot on leather.
Sew slowly. Leather does not forgive a fast, careless seam, and a mistake cannot be unpicked without leaving holes. A slow, steady pace gives an even stitch and a straight seam.
Do not backstitch at the start or end of a leather seam. Backstitching perforates the leather and weakens the seam. Leave long thread tails and finish them by hand instead.
Keeping the stitching even
Even stitching on leather comes from a marked line, a steady pace, and a foot that feeds the leather smoothly. Mark the seam line clearly, guide the leather without pulling it, and watch the line rather than the needle. A seam guide or a magnetic guide can help keep the stitching a consistent distance from the edge.
If the stitching wanders, stop and check the cause. The leather may be sticking to the foot, the layers may be shifting, or the marked line may be unclear. Fix the cause before continuing, since a wandering stitch on leather cannot be unpicked without leaving holes.
Good stitching on leather is a matter of the right needle, the right thread, a longer stitch, and a slow pace. Get those right on a scrap first, and the seam on the item will follow.