Clipping and Notching Curved Seams
Clipping and notching are small cuts in the seam allowance that let it follow a curve, and they are the reason a curved seam can lie flat instead of pulling or bunching.
Why the allowance needs cutting
A seam allowance is a strip of fabric between the stitching line and the cut edge. On a straight seam, that strip lies flat without any help. On a curved seam, it does not, because the stitching line and the cut edge are different lengths. On an outward curve, the cut edge is longer than the stitching line, so the allowance has too much fabric and it pulls. On an inward curve, the cut edge is shorter than the stitching line, so the allowance has too little fabric and it bunches. Cutting the allowance lets it adjust to the length it needs.
Clipping is the cut used on an outward curve. Small straight cuts are made into the allowance, at right angles to the stitching line, so the allowance can spread open like a fan. Notching is the cut used on an inward curve. Small V shaped wedges are cut out of the allowance, so the remaining fabric can close up without overlapping itself. Both are done after stitching, and both are simple, quick operations that make a large difference to the finished seam.
Without clipping or notching, a curved seam fights itself. The allowance pulls the stitching line out of shape, the seam stands away from the body, and the curve looks lumpy rather than smooth. With clipping or notching, the allowance relaxes, the stitching line keeps its shape, and the seam presses flat. It is one of the smallest steps in sewing and one of the most useful.
Clipping an outward curve
An outward curve is one that bulges toward the sewer, such as the outside of a sleeve cap or the curve of a collar. After stitching the seam, cut small clips into the allowance, at right angles to the stitching line, spaced along the curve. The clips should stop short of the stitching line, leaving a small margin of uncut fabric so the seam is not weakened. A clip that nicks the stitching can open up in wear and let the seam split, so the margin matters.
The spacing of the clips depends on how tight the curve is. A gentle curve needs only a few clips, spaced widely. A tight curve needs many, spaced closely, so the allowance can spread evenly. The test is whether the seam lies flat after pressing. If it still pulls, more clips are needed. If it lies flat, the spacing is right.
Sharp scissors make cleaner clips than blunt ones, because a clean cut does not fray as readily. Small embroidery scissors are useful here, because their short blades give control on a narrow allowance. The clips do not need to be deep, and they do not need to be perfectly even. They need to be frequent enough and close enough to the stitching line to let the allowance spread.
Notching an inward curve
An inward curve is one that dips away from the sewer, such as the inside of an armhole or a neckline. After stitching, cut small V shaped notches out of the allowance, with the point of the V toward the stitching line. The notches remove the excess fabric that would otherwise bunch up when the allowance is pressed to one side. As with clipping, the point of each notch should stop short of the stitching line, so the seam is not weakened.
Notches are spaced the same way as clips: widely on a gentle curve, closely on a tight one. The V shape matters, because a straight clip on an inward curve does not remove fabric, it only lets it overlap, and the overlap is what causes the bunching. Removing a small wedge is what lets the allowance close up neatly.
On a very tight inward curve, the notches may need to be cut close together, almost touching, so the allowance can follow the curve without any bunching at all. This is normal on a neckline or a small armhole, and it is not a sign of overcutting, provided each notch stops short of the stitching. A seam that is notched well will press flat and the curve will look smooth from the right side.
Grading and layering with clipping
Grading means trimming one layer of the allowance shorter than the other, so the layers step down instead of stacking at the same edge. It is often combined with clipping or notching on a curved seam in a medium weight fabric, because it stops the edge of the allowance showing as a ridge on the right side.
On a curved seam, grading is done after clipping or notching, or the clipping is done through both layers and then one layer is trimmed shorter. Either order works, and the choice depends on the fabric. The point is that the two techniques work together: clipping lets the allowance follow the curve, and grading lets it lie flat without a visible edge.
Layering, which is a form of grading where each layer is trimmed to a different width, is useful where several layers meet, such as at a collar or a facing. The layers step down in width, so no single thick edge shows through. On a curved seam with facings, layering the facing allowance shorter than the garment allowance gives a clean edge that does not show on the right side.
Common mistakes
Cutting too close to the stitching line is the most common mistake, and it is the one that matters most. A clip or a notch that nicks the stitching weakens the seam, and the seam can split in wear, especially on a curve that takes strain, such as an armhole. The remedy is to leave a clear margin, and to check the stitching after cutting. If a stitch has been nicked, the section should be restitched before the garment is worn.
Cutting too few clips or notches is the second mistake. A curved seam that still pulls or bunches after pressing usually needs more cuts, not more pressing. Adding more clips or notches, then pressing again, usually solves it.
Cutting before stitching is a third mistake, made by beginners who clip the allowance while the pieces are still separate. The cuts then do not line up with the finished seam, and they can end up in the wrong place or weaken the fabric before it is sewn. Clipping and notching are always done after the seam is stitched, when the curve and the stitching line are fixed.
When in doubt, clip more rather than fewer, and keep each cut short of the stitching. The cuts are hidden inside the seam, so they do not show, and a well clipped curve presses flat and looks smooth. That is the result the cuts are for, and it is worth the minute they take.