The Seam Line How seams are made, finished, and fixed

Home / Stretch Stitch for Knit Seams

Stretch Stitch for Knit Seams

A stretch stitch is the stitch that lets a knit seam move. It looks like a narrow zigzag with a forward step, and it gives the seam room to stretch without breaking.

What a stretch stitch is

A stretch stitch is a machine stitch built for fabric that moves. On most home machines it is a narrow zigzag that steps forward as it sews, sometimes called a lightning stitch because of its shape on the stitch chart. The forward step makes the stitch line look straighter than a plain zigzag from the outside, while the sideways movement gives the thread slack to open out when the fabric stretches. When the fabric relaxes, the stitch springs back to its original shape. That give is the whole point: the seam stretches with the fabric instead of fighting it.

A plain zigzag does a similar job, and on many machines it is the stitch used when no dedicated stretch stitch is available. The stretch stitch is neater and slightly stronger for the same width, since the forward step locks each stitch more firmly. An overlock stitch, sewn on a serger, is a third option, and it both joins and finishes the edge. The choice between them depends on the machine and the fabric, not on one being right for every knit.

When to use it

A stretch stitch suits any seam on a knit that will be pulled in wear. Side seams, sleeve seams, and waistband joins all benefit, since they stretch when the garment is pulled on and taken off. It also suits seams on activewear and swimwear, where the fabric stretches a long way and the seam must follow it. On a woven fabric, a stretch stitch is rarely needed, since the cloth does not move, and a straight stitch gives a firmer, neater seam there.

The stitch is also useful for topstitching on knits, such as a hem or a neckline, where a straight stitch would snap the first time the edge was stretched. A twin needle gives a similar result on hems, with two straight lines on the outside and a zigzag underneath, and the stretch stitch is the single-needle equivalent for seams.

Setting up the stitch

Fit a ballpoint needle before sewing, since a sharp needle can cut the loops of the knit and leave holes that run. Choose a thread with some give, and set the machine to the stretch stitch on its stitch chart. The stitch length is usually set in the middle range, and the width is narrow, so the stitch line stays close to straight. Sew a sample in the real fabric, then stretch the sample across the stitching and watch what happens. The stitches should open out a little and spring back without snapping or gaping.

If the sample puckers, loosen the tension slightly or lengthen the stitch a touch. If the stitches pop when the sample is stretched, the stitch may be too narrow or too long, and a slightly wider or shorter setting will give more slack. If the seam looks wavy, the fabric was probably pulled during sewing, and the fix is a lighter touch rather than a different setting.

Check the stitch chart before sewing, since the stretch stitch has different names and symbols on different machines. Sewing the wrong stitch by mistake is easy when the symbols are small, and a sample will catch it.

Sewing with a stretch stitch

  1. Pin or clip the pieces right sides together, keeping the edges even without stretching them.
  2. Sew the seam at a steady pace, guiding the fabric gently and letting the feed dogs move it.
  3. Keep the seam allowance even, since a wandering allowance makes the seam line uneven on the outside.
  4. Backstitch a few stitches at each end to secure the seam, or tie off the thread tails if backstitching distorts the knit.
  5. Stretch the finished seam gently across the stitching to check that it gives without popping.
  6. Press the allowances to one side with a press cloth, lifting the iron rather than pushing it.

A walking foot helps on knits that feed unevenly, since it moves the top layer at the same pace as the bottom one. Without it, the top layer can lag and the seam can end up with one side longer than the other. Slowing down also helps: a stretch stitch sewn slowly is more even than one sewn fast.

Stretch stitch or zigzag

The choice between a stretch stitch and a plain zigzag comes down to the fabric and the look wanted. A plain zigzag stretches further for the same width, so it suits very stretchy fabrics such as swimwear knits. A stretch stitch looks neater and lies flatter, so it suits jersey and other medium knits where the seam will show. Either one works if the sample stretches without popping, and the sample is the deciding test, not the name of the stitch. On a seam that will be pressed open, the stretch stitch lies flatter, while on a seam pressed to one side the difference is small, so the pressing plan can also guide the choice.

Once the stitch is set and tested, it becomes the default for knit seams on that machine. Record the settings with the fabric they were tested on, and the next knit project starts from a known stitch instead of a fresh guess. Keeping the sample with the settings written on it makes the record easy to find later.