The Seam Line How seams are made, finished, and fixed

Home / Pinked Seam Finish

Pinked Seam Finish

A pinked finish is the quickest seam finish. Pinking shears cut the raw edge into a zigzag, which frays less than a straight cut, and the seam is done.

How pinking works

Pinking shears have serrated blades that cut a zigzag edge instead of a straight one. On a straight cut, the threads of the fabric run to the edge and unravel easily, since each thread has a free end. On a pinked edge, the threads are cut at an angle, and each thread is shorter at the edge, so there is less length to unravel. The finish does not wrap the edge in thread, and it does not enclose it, so it is the lightest finish, but on a fabric that frays only a little, it is enough to keep the edge tidy through wear and washing. The pinked edge is visible on the wrong side, as a zigzag line along the allowance, and it looks less finished than overlocking or binding, which is why it is usually used on seams that will be hidden. It takes only a few seconds per edge, which makes it useful when many seams need a quick finish.

Which fabrics suit pinking

Pinking suits stable fabrics that fray only a little, such as cotton poplin, lightweight wool, stable linen and some rayons. It suits fabrics where the weave is tight enough that the threads do not pull away easily. It does not suit fabrics that fray heavily, such as loosely woven linen, rayon challis or some silks, since the zigzag cut alone will not hold those threads. It does not suit knits, where the edge curls rather than frays, and it does not suit sheer fabrics, where the zigzag edge shows through. It also does not suit a garment that will be washed often and hard, since the pinked edge will fray over time, even on a stable fabric. For a lined garment, where the seams are hidden, pinking is often enough, and for a toile or a test garment it is a quick way to finish the seams without spending time on a more elaborate finish. Test on a scrap, wash the scrap if possible, and see how the edge holds.

How to pink a seam

  1. Sew the plain seam first, and press it as the pattern asks, either open or to one side, before pinking the edges.
  2. Use sharp pinking shears, and test them on a scrap first, since blunt shears chew the edge rather than cutting it cleanly.
  3. Trim each seam allowance with the shears, cutting close to the seam stitching but leaving enough allowance to hold the seam, and keep the cut line straight and even.
  4. Press the seam again lightly after pinking, and check that the zigzag edge is even along the whole length and that no threads are pulling away.

Combining pinking with stitching

Pinking can be combined with a straight stitch to make it more secure. Stitch a straight line close to the raw edge before pinking, so the threads are held in place, then pink the edge outside the stitching. The stitch holds the weave, and the pinking cuts the remaining threads at an angle, so the combination holds better than either method alone. Another combination is to pink the edge and then stitch a zigzag along it, though that is slower and the zigzag alone would usually be enough. Pinking is also used as a first step before binding or turning, since trimming the edge with pinking shears reduces bulk and stops the edge fraying while the binding is pinned. In each case, the pinking is a helper, not the whole finish, and the main finish is the stitching or the binding. The combination is useful on a fabric that frays a little more than pinking alone can hold.

Limits and when to choose another finish

Pinking is a light finish, and its limits should be respected. On a fabric that frays heavily, the pinked edge will still fray, and the seam will weaken. On an unlined garment, where the seams are visible, a pinked edge looks unfinished, and binding or overlocking is a better choice. On a garment that will be washed often, a pinked edge will not last as long as an overlocked or bound edge. If the pinked edge starts to fray after washing a scrap, choose a stronger finish before sewing the garment. Pinking shears also need to be sharp, and they should be used only on fabric, since cutting paper or other materials blunts them. A pinked finish is a good choice when it is enough, and a poor choice when it is not, so the test on scrap is what decides.

Pinking shears are also useful for trimming a seam allowance before it is bound or turned, since the zigzag cut reduces bulk and stops the edge fraying while the binding is pinned. The shears should be kept sharp, and they should be used only on fabric, since cutting paper, card or other materials blunts the serrated blades quickly. A pair of pinking shears that is blunt will chew the fabric edge rather than cutting it, and the finish will look rough and fray more, not less. Test the shears on a scrap before using them on a garment, and have them sharpened by a specialist if they start to tear rather than cut. Good shears, kept for fabric only, will last for years and give a clean pinked edge every time.

Pinking is fast and light, and it suits stable fabrics and hidden seams. Keep the shears sharp, test the edge on a washed scrap, and choose a stronger finish when the fabric frays more than pinking can hold.