Seam Finishing Scissors
Seam finishing scissors cut the edge of a seam allowance in a way that slows fraying and trims bulk, and the most widely known kind is the pinking shear, which cuts a zigzag edge.
What seam finishing scissors are
Seam finishing scissors are scissors made for working on the edge of a seam allowance after the seam is sewn. The most familiar kind is the pinking shear, which has serrated blades that cut a zigzag edge instead of a straight one. The zigzag edge keeps the threads of the fabric from unravelling as quickly, because the cut crosses the weave at an angle rather than running along it. Other finishing scissors have a straight blade for trimming allowances, or a fine point for cutting into tight corners and curves.
These scissors are not the same as dressmaking shears, which cut fabric, or embroidery scissors, which cut thread. They are a finishing tool, used after the seam is sewn, and their job is to tidy the edge of the allowance and to reduce the bulk it adds.
Pinking shears and how they work
Pinking shears cut a row of small triangles along the edge of the fabric, leaving a zigzag. On a woven fabric, a straight cut leaves thread ends that can pull out of the weave one by one, which is how fraying starts. A zigzag cut leaves each thread end at a different length, and the angled cut resists pulling, so the edge frays more slowly. The finish is not permanent: on a fabric that frays heavily, a pinked edge will still fray over time, and it is not a substitute for an overlocked or bound edge. But on a fabric that frays little, it is a quick finish that needs no machine and no extra thread.
To use them, trim the seam allowance to an even width first, then cut along the edge with the pinking shears in one smooth motion, keeping the blades closed fully with each cut. Half-closed cuts leave uncut points, and the edge looks ragged. The shears should be sharp: dull pinking shears chew the fabric instead of cutting it, and the zigzag comes out uneven. Cutting along a chalk line helps keep the edge straight, since the zigzag can wander if the shears are guided by eye alone, and a straight pinked edge presses more neatly than a wandering one.
Trimming bulk with scissors
Finishing scissors are also used to trim bulk. On a curved seam, trimming the allowance with straight scissors before finishing the edge reduces the layers that bunch inside the curve. On a corner, trimming the allowance at an angle lets the corner turn sharply without a lump of fabric inside it. On a faced edge, trimming the allowances to different widths, called grading, lets the edge lie flat. These are all done with ordinary straight scissors or with the pinking shears, and they are part of finishing a seam well, not an extra step.
On a thick fabric, the scissors can thin the allowance by cutting it at an angle, so the edge steps down instead of stacking up. This is a small cut, but it makes the seam press flatter and the garment hang better.
Which fabrics suit a pinked finish
A pinked finish suits stable woven fabrics that fray slowly, like cotton, linen, and wool. On these, the zigzag edge holds well through normal wear and washing. It suits seams that will be hidden inside a garment, where the finish does not need to look neat from the outside. It suits children's clothes and everyday garments, where a quick finish is enough.
It does not suit fabrics that fray heavily, like loosely woven rayon or some silks, where the pinked edge will fray through quickly. It does not suit fabrics that are cut on the bias, where the zigzag can stretch out of shape. And it does not suit seams on the outside of a garment, where the finish is visible and needs to look deliberate rather than makeshift. On a lined garment, the pinked edge is hidden inside, so the finish only needs to hold the fabric together, and it does that well. On an unlined jacket, where the inside is seen, a bound or overlocked edge looks more finished, and the pinked edge can look like a shortcut.
Keeping finishing scissors sharp
Pinking shears dull faster than straight scissors, because the serrated blades have more cutting edge to wear. They should be used only on fabric, never on paper or plastic, which dulls them quickly. They should be stored closed, with the blades protected, and they should be sharpened by someone who knows how to sharpen serrated blades, since an ordinary sharpening can damage the teeth. A sharp pair of pinking shears cuts cleanly with little effort, and a dull pair needs force and leaves a ragged edge.
Straight finishing scissors need the same care: used on fabric only, stored closed, and sharpened when they start to drag instead of cut. A pair of scissors that is kept sharp is a pleasure to use, and a dull pair is a frustration that shows in the work.
Straight finishing scissors are also used to trim a seam allowance on a curve, where the allowance must be narrower so it can lie flat. Trimming the allowance before it is finished, whether by pinking or by another method, reduces the fabric that bunches inside the curve. The cut should follow the curve smoothly, without nicking the stitching, and the remaining allowance should be even in width. A trimmed and finished curve presses flatter and looks smoother than one where the full allowance was left in place.
Seam finishing scissors are a modest tool, but they do a job no machine does: they tidy a seam edge by hand, in a few seconds, with no setup. For a quick finish on a fabric that frays little, they are often the simplest answer.