Overlocker for Seam Finishing
An overlocker trims the raw edge of a seam and wraps it in thread in a single pass, giving a clean finish that keeps fabric from fraying and looks neat inside a garment.
What an overlocker is
An overlocker, also called a serger, is a machine that sews over the edge of fabric. As the fabric feeds through, a blade trims the raw edge, and loopers wrap thread around the cut edge, enclosing it. The result is a finished edge that does not fray, made in one pass. The machine uses several threads at once, usually three or four, and it sews much faster than a standard machine. It is a specialist machine: it finishes edges and sews stretchy seams well, but it does not replace a sewing machine for straight stitching, buttonholes, or topstitching.
The overlocked edge is the finish seen inside most ready-made garments. It is neat, it is durable, and it is the reason the inside of a shop-bought garment looks clean. A home sewer can get the same finish with an overlocker, and the machine is the standard tool for the job.
How it finishes a seam
The usual method is to sew the seam first on a standard machine, then overlock the raw edges of the seam allowances. The overlocker trims a small amount from the edge and wraps it in thread, so the allowance cannot fray. The two allowances can be overlocked together, as one edge, or separately, one at a time. Overlocking them together is faster and suits seams that will be pressed to one side. Overlocking them separately suits seams that will be pressed open, since each allowance can then be pressed flat on its own side.
On knits, the overlocker can also sew the seam itself, because the overlock stitch stretches with the fabric. A seam sewn on an overlocker in a knit will stretch when the garment is worn and spring back when it is not, which a straight stitch cannot do. This is why overlockers are common in knit sewing, and why many knit garments are made entirely on one.
When to use one
An overlocker is worth using when the fabric frays, when the garment will be washed often, or when the inside of the garment should look neat. Cotton, linen, and other fabrics with loose weaves fray quickly, and an overlocked edge keeps them tidy through many washes. A garment that will be worn and washed regularly benefits from the durability of the finish. A garment in a fabric that barely frays, like a stable knit or a felted wool, may not need it, and a simpler finish may be enough.
The overlocker is also the usual choice for seam finishing on unlined jackets and coats, where the inside of the garment is visible. A clean overlocked edge looks finished, while a raw edge looks unfinished, and the difference is obvious when the garment is opened.
Threading and setup in general terms
Threading an overlocker is the part that takes practice. The machine has several thread paths, one for each needle and looper, and each must be threaded in the right order for the stitch to form. Most machines come with a threading guide printed on the machine itself, and a manual that shows the path step by step. The tension of each thread also needs to be set so the stitch lies flat and the edge is wrapped evenly. When the stitch looks uneven, with loops hanging off the edge or the thread pulling tight, the tension is usually the cause, and adjusting it one thread at a time is the way to fix it.
The blade can be moved out of the way when the edge should be wrapped without trimming, which is useful for finishing an edge that has already been cut to the right width. The stitch length and width can also be adjusted to suit the fabric: a shorter stitch for a fine fabric, a wider stitch for a fabric that frays heavily.
Limits and alternatives
An overlocker cannot sew a straight seam the way a standard machine can, and it cannot sew a buttonhole, a zip, or a topstitch. It also removes fabric as it sews, because the blade trims the edge, so a mistake on an overlocker can cut the garment, not just the thread. For that reason, seams are usually sewn on a standard machine first and overlocked afterwards, so the seam itself is safe.
Without an overlocker, a seam can be finished with a zigzag stitch, a bound edge, or a turned and stitched edge, and those methods work well on many fabrics. The overlocker is faster and neater, but it is not the only way to finish a seam, and a garment sewn without one is not a lesser garment for it. Some overlockers also have a setting that adjusts how the two layers of fabric feed through, which helps on knits that stretch as they are sewn. This is a useful feature on stretchy fabric, though it takes some practice to set, and a test seam on scrap fabric is the way to learn it.
Overlocking a curved edge needs a slower pace than a straight one. The fabric must be eased around the curve so the edge stays under the blade, and the blade trims a little more on the outside of the curve than on the inside. Feeding the curve too fast lets the edge wander away from the blade, so the thread wraps air instead of fabric and the finish comes out loose. A slow, steady feed, with the hands guiding the curve gently, keeps the edge in place and the stitching even all the way around.
An overlocker is a finishing machine, and its job is to make the inside of a garment as clean as the outside. Used for that job, it is fast, durable, and hard to beat.