Denim Seams: How They Are Made
Denim seams look simple, but they are built to take hard wear. The seams on a pair of jeans are flat, strong, and stitched to show, and each of those qualities is deliberate.
Why Denim Seams Are Different
Denim is a heavy twill fabric, and it is used for garments that are worn hard, washed often, and pulled in every direction. A seam on jeans has to hold through all of that without splitting, fraying, or going lumpy. It also has to lie flat, since a bulky seam on a jeans leg or waistband would be uncomfortable and would show through the fabric. Those two demands, strength and flatness, shape every choice in a denim seam.
The look matters too. On jeans, the stitching is visible by design. The twin rows of topstitching along the leg and the pocket are part of what makes jeans look like jeans. A denim seam is therefore planned as both a construction detail and a design feature, and the stitching has to be even because it will be seen.
Flat-Felled Seams
The flat-felled seam is the classic denim seam. One seam allowance is trimmed, the other is folded over it, and the fold is stitched down, so the raw edges are enclosed and the seam lies flat. The result is strong, since the stitching passes through several layers, and it is tidy on the inside, since no raw edge shows. Flat-felled seams appear on the inseams and outseams of jeans, and on the yokes and pockets of denim jackets and shirts.
Flat-felled seams take more steps than a plain seam, and they are harder to sew around curves. The fold has to be even, and the topstitching has to catch the folded edge all along the seam, or the fold will lift. On thick denim, the layers stack up quickly, so the seam is often sewn slowly with a heavy-duty needle and strong thread. The effort is worth it, since the seam is one of the strongest in sewing and it stays flat through years of wear and washing.
Topstitched Seams
Many denim seams are plain seams with the allowance pressed to one side and topstitched down. Topstitching holds the allowance flat, adds a second row of holding power, and gives the seam its visible finish. On jeans, topstitching usually runs in a contrasting thread, which makes the seam a design feature as well as a construction detail. The stitching has to be straight and even, since it is on show.
Double-needle topstitching, which sews two parallel rows at once, is common on jeans for the same reason it is common on upholstery: two rows share the load and give a neat, even finish. The rows are often placed close to the seam line and along the edge of the folded allowance, so they hold the seam flat and keep it from shifting in the wash.
Thread, Needles, and Stitch Length
Denim seams need strong thread, usually a heavier thread made for topstitching, and a needle made for denim that can punch through several layers without bending or skipping. A heavy-duty needle made for denim is the usual choice, and the needle should be fresh, since a blunt needle will push the fabric instead of piercing it. Sewing slowly helps the machine drive the needle through thick joins without missed stitches.
Stitch length on denim is usually longer than on lighter fabrics. A longer stitch suits the heavy fabric and keeps the seam from puckering, while a very short stitch can weaken the denim along the seam line. The exact length depends on the weight of the denim, so testing on a scrap of the same fabric is the way to settle it. Strong thread, a denim needle, and a sensible stitch length together make a seam that holds.
Bulk at the Joins
The hardest part of a denim seam is often the bulk where several layers meet, such as at a pocket corner or where the inseam crosses the crotch. The layers stack up, the foot cannot sit flat, and the stitching can skip or wander. The usual answer is to trim and grade the seam allowance, cutting each layer to a slightly different width so the step is smaller, and to press the seam flat before topstitching. A hump jumper or a folded piece of fabric under the back of the foot can help the machine climb over a thick join.
Clipping the allowance on curves lets the seam turn without puckering, and hammering a thick join flat with a mallet is a traditional way to soften the bulk before sewing. The goal is a seam that lies flat and feels smooth, even where several layers cross. A seam that is bulky at the joins will rub, show through the fabric, and wear faster than a flat one.
Seams on Denim Jackets and Shirts
Denim is used for more than jeans, and its seams change with the garment. A denim jacket uses flat-felled seams on the shoulders and sleeves, where strength matters, and topstitched plain seams on the body panels, where the seam should lie flat under the lining or against the body. The collar and cuffs are sewn with enclosed seams, so no raw edge shows at the edges that are handled most. A denim shirt uses lighter seams than jeans, since the fabric is usually lighter and the garment takes less strain, but the same principles apply: enclose the edges, keep the seam flat, and topstitch where the seam will show.
On a jacket, the seams around the armholes and the yoke take the most movement, since the arms lift and the shoulders shift with every movement. Those seams are often double-stitched, and the allowance is graded so the seam does not bulk up under the arm. A jacket seam that is bulky at the armhole will rub and feel uncomfortable, so the same care with bulk that applies to jeans applies here too, even though the fabric may be lighter.
Fraying and Finishing
Denim frays, and the raw edges inside a seam need to be dealt with. On a flat-felled seam the edges are enclosed, so fraying is not a problem. On a plain seam, the raw edge is usually overlocked, zigzagged, or bound, or it is enclosed by topstitching the allowance down. If the edge is left raw, it will fray in the wash and the seam allowance will thin out over time, which weakens the seam.
A well-made denim seam stays flat, stays strong, and looks neat after many washes. The ingredients are simple: a flat-felled or topstitched construction, strong thread, a denim needle, and careful handling of bulk at the joins. Get those right, and the seam will outlast the jeans.