How to Sew Denim Seams
Denim is heavy, stiff, and hard on machines, but its seams are straightforward once the needle, thread, and stitch length are right.
Getting Set Up
The first step is the needle. Use a heavy-duty needle made for denim, fresh out of the packet, since a blunt needle will push the fabric instead of piercing it and can skip stitches on thick layers. The thread should be strong thread made for denim or topstitching, since ordinary thread can snap under the strain of a jeans seam. Match the thread colour to the project, remembering that topstitching on jeans is often done in a contrasting thread that will show.
Set the stitch length longer than for light fabric. A longer stitch suits heavy denim and keeps the seam from puckering, while a very short stitch can weaken the fabric along the seam line. Test the stitch length, the thread, and the needle on a scrap of the same denim before sewing the real pieces. The test will show whether the machine feeds the fabric evenly and whether the stitching looks right.
Sewing a Plain Denim Seam
- Pin or clip the pieces right sides together, matching notches and marks along the seam line.
- Sew the seam slowly, letting the machine feed the fabric rather than pushing it through.
- Press the seam allowance to one side, using a cloth if the iron is likely to mark the fabric.
- Trim and grade the allowance where layers stack up, so the seam lies flat.
- Topstitch the allowance down from the right side, keeping the stitching straight and even.
- Check the seam from both sides before moving on to the next one.
Pressing the seam before topstitching is what makes the topstitching run straight. A seam that is pressed flat gives the foot a smooth surface to travel over, and the topstitching will follow the seam line instead of wandering over a ridge. Press on the wrong side where possible, and use a cloth if the iron is likely to mark the denim. A seam that is topstitched over a ridge will keep that ridge, and the stitching will look uneven even if it was sewn carefully.
Sewing a Flat-Felled Seam
A flat-felled seam takes more steps, but it is the strongest denim seam and it encloses the raw edges. Sew the two layers wrong sides together first, with a narrow seam allowance. Trim one allowance close, then fold the other allowance over it and press the fold flat. Topstitch the fold down from the right side, catching the folded edge all along the seam. The result is a flat seam with two rows of visible stitching and no raw edge showing inside.
Flat-felled seams are harder on curves, since the fold has to stay even as the seam turns. On a straight seam such as a jeans inseam, the fold is easy to keep even. On a curved seam, pin the fold in place and sew slowly, checking that the topstitching catches the folded edge. If the fold lifts in places, the seam will look untidy and the raw edge may peek out.
Handling Bulk at Joins
Bulk is the main difficulty in sewing denim seams. Where several layers meet, such as at a pocket corner or a crotch join, the foot cannot sit flat and the needle may skip. Trimming and grading the allowance reduces the step, and pressing the seam flat before topstitching helps. A hump jumper, a small tool placed under the back of the foot, lifts the foot level with the thick layers so it can climb over the join without stalling.
Going slowly over thick joins matters more than any tool. Let the machine take its time, and turn the handwheel by hand if the needle struggles to get through. Forcing the fabric through can bend the needle or break it, and a broken needle can damage the machine. Patience at the joins is what keeps denim seams straight and even.
The order of sewing can help too. Where a seam crosses another seam, sewing the flatter seam first and the bulkier one second can spread the layers out, and trimming the allowance of the first seam before the second is sewn keeps the stack lower. On a pocket, sewing the pocket to the leg before the leg seam is joined means the pocket layers are already flat when the leg seam crosses them. Thinking about the order before starting saves unpicking later.
Topstitching Denim
Topstitching is sewn from the right side, so it has to be straight and even. A seam guide or a marked line on the machine helps keep the distance from the seam consistent. Sew at a steady speed and keep your eyes on the guide, not on the needle, since watching the guide is what keeps the line straight. If the topstitching wanders, it will show, so it is better to go slowly and keep the line true.
Double-needle topstitching sews two parallel rows at once and gives a neat, even finish, but it needs a machine that takes a double needle and a foot wide enough for both needles. Whether sewn with one needle or two, topstitching should be tested on a scrap first, since the stitch length and the thread tension have to suit the denim.
Change the needle often when sewing denim. A needle that has sewn through many thick layers will be blunt, and a blunt needle causes skipped stitches and can damage the fabric along the seam line.
Denim seams reward preparation. Set up with the right needle and thread, test on a scrap, handle the bulk at the joins slowly, and the seams will come out flat, strong, and neat.