The Seam Line How seams are made, finished, and fixed

Home / Seam Finish for Unlined Jackets

Seam Finish for Unlined Jackets

An unlined jacket has no lining to hide its seams, so every seam inside is on show. The finish needs to look good, feel smooth, and hold the edges through wear.

Why the finish matters more here

When a jacket is worn open, or taken off and carried, the inside is visible. A rough or fraying seam inside a jacket looks unfinished, even if the outside is well made, and it can catch on clothing worn underneath. The finish also needs to feel smooth, since the jacket sits against a shirt or a blouse, and a scratchy edge will rub. The seams of a jacket take stress too, at the shoulders, the side seams and the armholes, so the finish should help the seam to last, not just look tidy. That combination of appearance, comfort and durability is why the finish on an unlined jacket deserves more thought than the finish on a lined garment, where a quick overlock is enough because it will never be seen. The finish should match the standard of the jacket as a whole, so a tailored jacket does not have a rough inside.

Bound seams for jackets

Binding is the most common finish for an unlined jacket. Each raw edge is covered with bias binding, which gives a smooth, smart edge that looks intentional. The binding can match the jacket fabric, for a quiet tailored look, or it can contrast, for a feature inside the jacket. Binding suits the medium-weight wovens often used for jackets, such as wool, linen and cotton twill, which press well and hold the binding in place. The allowances are usually pressed open and each edge is bound separately, so the seam lies flat. Binding takes time, since each edge is pinned and stitched, but the result is worth it on a jacket that will be worn for years. The binding also protects the edge from fraying, which matters on a wool that frays easily. Test the binding on a scrap of the jacket fabric first, to check that the width covers the edge and that the fabric does not pucker under the stitching.

French seams and other enclosed finishes

A French seam is another good choice for an unlined jacket, especially on a lighter jacket fabric. It encloses the raw edges inside a second seam, so there is no visible thread and no raw edge at all. It suits straight seams, such as the side seams and the shoulder seams, and it looks clean and tailored. A flat-felled seam can also be used on a jacket, particularly on a casual or work-style jacket, where the topstitching suits the design. A Hong Kong finish, which is a bound finish where the binding is stitched to one side only and left unfolded on the other, is a lighter version of binding, and it is sometimes used on a jacket where full binding would add too much bulk. Each of these finishes takes longer than overlocking, but each gives an inside that looks made rather than merely finished.

Overlocking and when it is enough

Overlocking can be used on an unlined jacket, and on many ready-made jackets it is the finish that is used. It is fast, it stops fraying, and it looks tidy if the thread matches the fabric and the stitch is even. It is less smart than binding, and the thread loops are visible, but on a casual jacket or a jacket in a busy fabric, that may not matter. If overlocking is chosen, the thread should match the fabric closely, the tension should be even, and the seam should be pressed well, so the finish looks as neat as possible. Overlocking suits a jacket in a fabric that frays heavily, where a bound edge might be bulky, and it suits a jacket made in a hurry. For a tailored jacket, binding or a French seam is usually the better choice, since the inside should match the outside in standard.

Planning the finish across the jacket

Plan the finish before cutting, since some finishes need a different allowance. A French seam needs a narrower first pass and a wider second pass, while a bound finish needs enough allowance for the binding to cover. Check the pattern instructions, and decide the finish for each seam: the side seams, the shoulder seams, the sleeve seams and the centre back. The same finish is usually used throughout the jacket, so the inside looks consistent, though a different finish may be used on a curved seam where binding is difficult. Press each seam as it is finished, and check the inside of the jacket as a whole before moving on, since a single rough seam will stand out against the rest. The time spent on the finish is part of making the jacket, not an extra step to rush at the end.

The lining question should be settled before the finish is chosen. A jacket that is fully lined needs only a quick finish, since the lining hides the seams, while a jacket that is unlined or half lined needs a smart finish on every seam that will be seen. A half lined jacket, with a lining in the upper back and the sleeves only, needs a smart finish on the lower seams and a quick finish on the lined seams. That mixed approach saves time without spoiling the look, since the lined areas are hidden. The pattern usually states whether the jacket is lined, unlined or half lined, and the finish should follow that plan. Changing the lining plan after cutting means rethinking the finish too, since a seam that was meant to be hidden may suddenly be visible.

On an unlined jacket, the inside is part of the garment. Choose binding or an enclosed finish, match the standard to the jacket, and press each seam well, and the inside will look as considered as the outside.