ISO 4916 Superimposed Seams (Class 1)
Superimposed seams are ISO 4916 Class 1. They are the most common seam construction in garment sewing: two pieces of fabric lie face to face, and a line of stitching joins them through both layers.
How a superimposed seam is built
The construction is simple. Two pieces of fabric are placed with their right sides together, the edges are aligned, and a line of stitching is sewn through both layers at the chosen distance from the edge. That distance is the seam allowance. Once the stitching is done, the seam is usually pressed open, with the allowances lying flat on either side of the stitch line, or pressed to one side, with both allowances lying together. The raw edges remain visible on the wrong side unless a finish is added.
The stitching can take many forms. A straight lockstitch is the most common choice for a plain superimposed seam. An overlock stitch can join and finish the edges in one pass. A chain stitch can be used where stretch is needed. The class does not change with the stitch: a superimposed seam sewn with any of these stitches is still Class 1, because the class describes how the pieces are placed, not which stitch holds them.
Where Class 1 seams are used
Superimposed seams are used wherever a simple, flexible join is needed. Side seams, shoulder seams, sleeve seams, and centre seams on shirts, dresses, trousers, and skirts are usually Class 1. The construction suits most fabrics, from light cotton to medium-weight wool, and it suits most garments, because it is quick to sew, easy to press, and easy to adjust. If a garment needs to be let out or taken in, a superimposed seam can be unpicked and re-sewn at a different allowance, which makes it useful during fitting.
The seam is also the starting point for many other constructions. A French seam begins as a superimposed seam and adds a second line of stitching to enclose the edges. A flat-felled seam begins with the pieces superimposed and then folds and stitches the allowance down. Knowing the Class 1 construction makes those variations easier to understand, because they build on the same placement of the fabric pieces.
Seam finishes for Class 1
A plain superimposed seam leaves raw edges that can fray, so a finish is usually added. The choice of finish depends on the fabric and the garment. An overlocked finish trims and wraps the edge in one pass and suits most fabrics. A zigzag finish suits a fabric that frays lightly and where no overlocker is available. A bound finish wraps the edge in a strip of fabric and suits a garment where the inside will be seen, such as an unlined jacket. A pinked finish, cut with pinking shears, suits a fabric that frays little.
The finish should be chosen before the seam is sewn, because some finishes are easier to apply to the flat allowances before the seam is pressed, while others are applied after pressing. A finish that is too bulky can show through light fabric, and a finish that is too light may not stop a fabric that frays readily. Testing the finish on a scrap of the same fabric, including pressing, shows how it will look and behave in the finished garment.
Strengths and limits
The strengths of a Class 1 seam are its simplicity, its flexibility, and its ease of adjustment. It can be sewn quickly, it can be pressed flat, and it can be altered during fitting. It suits a wide range of fabrics and garments, and it is the construction most sewists learn first. Its main limit is that the raw edges need a finish, which adds a step, and that the seam can be bulky where several layers meet, such as at a corner or a join.
Another limit is slippage on smooth or loosely woven fabrics. A single row of stitching through two layers gives the yarns only one line to grip, so on satin or sheer cloth the seam can open under strain. In those cases a shorter stitch, a wider allowance, or a different construction may be needed. The seam can also pucker if the tension is too tight or the layers feed unevenly, because the two layers are held only by the one stitch line. Those problems are covered in the guides on puckering and slippage, and the fixes apply to Class 1 seams as much as to any other.
Checking a Class 1 seam
A well-sewn Class 1 seam lies flat after pressing, with the stitch line straight and the allowances even. The stitches should be even in length, with no skipped stitches, and the seam should not pucker or pull. Pull the seam gently across the stitch line to check for slippage, and check the raw edges for fraying after the finish is applied. If the seam will be altered during fitting, leave the allowances untrimmed until the fitting is done, so there is fabric to work with.
When a specification calls for a Class 1 seam, check that the pieces were placed face to face and stitched through both layers, rather than lapped or bound. That check is the core of the classification: the class describes the placement, and the placement is what makes the seam Class 1. The stitch, the finish, and the allowance complete the specification, but the placement is what defines the class.