The Seam Line How seams are made, finished, and fixed

Home / ISO 4916 Flat Seams (Class 4)

ISO 4916 Flat Seams (Class 4)

Flat seams are ISO 4916 Class 4. In this construction the fabric pieces meet edge to edge, without overlapping and without one lying on top of the other, and the join lies flat with little or no bulk.

How a flat seam is built

The construction starts with two pieces of fabric placed edge to edge, with their cut edges meeting but not overlapping. The join is made by stitching across the meeting edges, so the thread bridges the gap between the pieces and holds them together. The stitching can be a flatlock stitch, which loops across the edges and lies flat on both sides, or a similar stitch that joins the edges without folding them. The seam allowances are minimal, because the pieces do not overlap, and the finished seam has almost no thickness beyond the fabric itself.

Some flat seams use a small fold or a narrow overlap at the very edge to give the stitches more to grip, but the defining feature remains the same: the pieces meet edge to edge and the seam lies flat. The class covers the range of flat constructions, from a simple butted join to a flatlock seam with several threads looping across the edges. The stitch type and the number of threads complete the specification, but the edge-to-edge placement is what makes the seam Class 4.

Where Class 4 seams are used

Flat seams are used where bulk must be kept to a minimum, or where the seam will sit against the skin and must not rub. They appear on underwear and base layers, where a raised seam would chafe, on sportswear and swimwear, where a flat seam moves with the body and does not catch, and on children's clothing, where comfort matters. They also appear on knits, where a flat seam preserves the stretch of the fabric and does not create a ridge that would show through a close-fitting garment.

The construction suits stretch fabrics, light fabrics, and garments worn close to the body. It suits a flatlock machine, which is made for this kind of join, and it can be sewn on an overlocker set for flatlocking. It is less suited to woven fabrics that fray readily, because the edge-to-edge join leaves the cut edges exposed to the stitching alone, and it is less suited to garments that take heavy strain, where an overlapping seam would give more grip.

Flatlock stitching

The flatlock stitch is the stitch most often used for a Class 4 seam. It uses several threads that loop across the meeting edges and interlock on the surface, forming a flat ladder of stitching that holds the pieces together without folding them. The stitch can be sewn so that the loops sit on the right side as a decorative feature, or so that they sit on the wrong side and the right side shows only a flat join. The choice depends on the garment and on whether the stitching is meant to be seen.

Flatlock stitching needs a machine that can form the stitch, usually a flatlock machine or an overlocker with a flatlock setting. The tension of each thread needs to be balanced so the loops lie flat and the edges meet without pulling in or gaping. Testing on a scrap of the same fabric, with the same threads, is the reliable way to find the balance, because the right tension for one knit is often wrong for another. A test seam that is pulled gently in both directions shows whether the join holds and whether it recovers its shape.

Strengths and limits

The strengths of a flat seam are its comfort, its flatness, and its stretch. There is almost no bulk, so the seam does not rub against the skin, does not show through a close-fitting garment, and does not create a ridge on the right side. The flatlock stitch stretches with the fabric, so the seam moves with the body instead of resisting it, which suits activewear and underwear. The seam is also neat from both sides, with no raw allowances to finish.

The limits are strength and edge security. An edge-to-edge join has less fabric for the stitches to grip than an overlapping seam, so it can be weaker under a hard pull, and it can be more prone to the edges parting if the stitching is not balanced. Woven fabrics that fray can be a problem, because the cut edges are held only by the looping threads. The construction also needs a suitable machine, and it is harder to sew accurately by hand or on a basic machine than a plain superimposed seam. For a garment that takes heavy strain, a lapped or superimposed seam is usually the stronger choice.

Checking a Class 4 seam

A well-sewn flat seam lies completely flat, with the edges meeting evenly and no gap between them, and with the stitching lying flat on both sides. The seam should stretch with the fabric and recover without the edges parting, and it should feel smooth against the skin with no ridge or hard spot. Pull the seam gently in both directions and check that the edges stay together and that no thread breaks.

When a specification calls for a Class 4 seam, check that the pieces meet edge to edge rather than overlapping or lying face to face. That placement is what defines the class. The stitch type, the thread, and the tension complete the specification, but the flat, edge-to-edge join is the feature that makes the seam Class 4, and it is the feature to check first when comparing a sewn seam with the specification.