How to Calculate Seam Allowance
Calculating seam allowance is mostly simple addition. The finished size plus the allowance on each side gives the size to cut.
The basic sum
The allowance is the strip of fabric that runs from the stitching line out to the raw edge. To find the size of a piece to cut, start with the finished size and add the allowance for every edge that will be seamed. A rectangle that should finish at 10 inches wide, with a 5/8 inch allowance on both long edges, is cut at 11 1/4 inches wide: 10 inches plus 5/8 inch on each side.
The same logic works in metric. A piece that should finish at 25 cm wide, with a 1.5 cm allowance on both sides, is cut at 28 cm wide. The allowance is added once per seamed edge, not once per piece. A piece with seams on all four sides gets the allowance added four times, twice across the width and twice across the length.
Hems work the same way, with the hem allowance instead of the seam allowance. A skirt that should finish at 60 cm long, with a 2.5 cm hem allowance at the bottom and a 1.5 cm seam allowance at the waist, is cut at 64 cm long.
Working from a pattern that includes allowance
Most commercial patterns include the allowance in the tissue piece, so no calculation is needed before cutting. The piece is cut on the printed cutting line and stitched on the stitching line, or at the stated distance from the edge. The calculation still matters when a piece is changed. If a bodice front is widened by 1 inch at the side seam, the cutting line moves out by 1 inch, and the stitching line moves with it, so the allowance stays the same.
To check whether a pattern includes allowance, measure the tissue piece and compare it with the finished measurements given on the envelope or in the instructions. The tissue should be larger than the finished size by twice the allowance at each seamed edge. If the tissue matches the finished size exactly, the allowance has not been added, and it must be added before cutting.
Working from a net pattern
Some patterns give only the net shape, which is the finished size with no allowance added. Drafting patterns and some industry patterns work this way. The maker adds the allowance when cutting, which means drawing a second line outside the net shape at the chosen distance, and cutting on that outer line.
- Decide the allowance for each edge, using the pattern instructions or the standard for the project, such as 5/8 inch for garment seams.
- Mark the net shape on the fabric or on paper, including notches and matching points.
- Draw the cutting line outside the net shape at the allowance distance, using a ruler or a seam gauge to keep the distance even.
- Mark the stitching line as the net shape itself, since the net shape is the finished size.
- Cut on the outer line and stitch on the net shape line.
Curves need care here. On a curved edge, the allowance line must follow the curve at an even distance, not as a straight offset. A flexible ruler, a French curve, or a series of short marks joined into a smooth line all work. A wavy allowance line produces a wavy seam.
Allowance for a French seam
A French seam is stitched in two passes, and its allowance is calculated in two parts. The first stitch is narrow, often 1/4 inch, and it joins the pieces with wrong sides together. The seam is then pressed, turned, and stitched again at a wider distance, often 3/8 inch, which encloses the raw edges. The total allowance is the sum of the two passes, so a 1/4 inch first stitch plus a 3/8 inch second stitch gives a total allowance of 5/8 inch.
The split between the two passes can vary. A common split is 1/4 inch first and 3/8 inch second, but a 3/8 inch first stitch with a 1/4 inch second stitch also appears. What matters is that the second stitch is wider than the first, so the raw edges sit inside the fold, and that the total matches the allowance the pattern allows for. When a pattern is written for a plain seam and the maker wants a French seam instead, the total allowance stays the same and only the split changes.
Checking the maths before cutting
A quick check catches most errors. After calculating, add up the finished size and all the allowances on that measurement and compare the result with the tissue or the drawn piece. If the numbers do not match, find the error before cutting, because an error found after cutting costs fabric.
Matching seams deserve a second check. Two pieces that join along one edge must have the same allowance on that edge, and their stitching lines must be the same length. If one piece was calculated with a 5/8 inch allowance and the other with 1/2 inch, the stitching lines will not match even though the cutting lines look right. The pieces will pucker or pull when joined.
It also helps to write the numbers down. A short note on the pattern piece, such as "side seam 5/8 inch, hem 1 inch", keeps the calculation visible while cutting. Memory is a poor place to store four different widths across a project, and a note costs nothing.
When a calculation gives an awkward fraction, round to the nearest mark the ruler shows rather than guessing. A consistent 5/8 inch is better than a wavering line that averages out to the right number.
Seam allowance maths is not complicated, but it rewards doing it on paper before doing it on fabric. Finished size plus allowance on each seamed edge gives the cutting size, the total stays the same when a French seam splits it in two, and a short check against the pattern catches the errors that matter. With those three habits, the numbers stop being a source of worry and start being a quiet check that the pieces will fit.