Seam Gauge
A seam gauge is a small ruler that measures the short distances sewing depends on: seam allowances, hem depths, and the spacing between buttons and buttonholes.
What a seam gauge is
A seam gauge is a short, narrow ruler, usually about fifteen centimetres long, with markings along its edge and a small sliding marker that can be set to a chosen measurement and locked in place. The marker is the feature that makes the gauge useful: once it is set to a distance, the gauge can be used again and again to mark the same distance without measuring it fresh each time. The gauge is small enough to fit in a hand, and it is made of metal or plastic, with the metal kind lasting longer and the plastic kind being lighter to carry.
The gauge is a measuring tool, not a cutting tool, and it is not a substitute for a long ruler. Its length suits short measurements, and its sliding marker suits repeated ones. For a long straight edge, a longer ruler is the right tool. For a hem that needs to be the same depth all the way around, the gauge is the right one.
Measuring a seam allowance
The most common use is measuring and marking a seam allowance. The sliding marker is set to the width the pattern calls for, and the gauge is laid across the fabric edge, with the marker showing where the stitching line should fall. The line can then be marked with chalk or a fabric marker, or the gauge can simply be held in place as a check while the seam is sewn. On a pattern piece, the gauge checks that the allowance printed on the pattern is the width it claims to be, which is worth doing before the fabric is cut.
The gauge is also used to check a seam that has already been sewn. Laying it across the seam allowance shows whether the allowance is the width it should be, and whether it is the same width along the whole seam. An allowance that narrows halfway along a seam is a sign that the stitching drifted, and it is easier to catch with a gauge than by eye. On a pattern piece that has been traced onto fabric, the gauge checks the marked stitching line against the cut edge, so a line that was drawn in the wrong place is found before the pieces are sewn together.
Marking hems and folds
A hem needs to be the same depth all the way around a garment, or it will hang unevenly. The gauge is set to the hem depth, and the fold is measured and marked at intervals around the hem, using the sliding marker as a fixed reference. The same method works for any fold that must be even: a facing, a cuff, or a binding. The marker stays set, so each measurement matches the last, and the hem comes out even without the repeated measuring that a plain ruler would need.
The gauge is also useful for marking the placement of buttons and buttonholes, where the spacing must be even. Set the marker to the distance between buttons, and the gauge marks each position in turn. It is a small job, but even spacing is visible in a finished garment, and the gauge is what makes it reliable.
Other uses
A seam gauge can check the distance from a seam to a topstitching line, measure the width of a binding, or set the depth of a pleat. It can mark the point where a dart ends, or the place where a seam should be clipped. Any short distance that needs to be measured more than once, or measured accurately, is a job for the gauge. It is also handy for checking the depth of a seam allowance on a quilt block, where a consistent allowance is what makes the blocks fit together. On a garment, it can check the width of a hem allowance before the hem is folded, so the fold lands in the same place all the way around, and it can measure the overlap on a button band, where an uneven overlap makes the buttons sit crooked.
The gauge is sometimes used as a straight edge for drawing short lines on fabric, though its short length limits this. For a line longer than the gauge, a longer ruler suits the job, and the gauge is kept to the measuring it was made for. It can also be used to check the depth of a facing or a binding after it is folded, so the folded edge sits evenly before it is stitched down.
Keeping it accurate
A seam gauge stays accurate if it is treated well. The sliding marker should move smoothly and lock firmly: a marker that slips gives a different measurement each time it is used, which defeats the purpose of the tool. A metal gauge can be wiped clean, and a plastic gauge should be kept out of heat, which can warp it. The markings should be checked against a ruler now and then, since a worn or faded gauge can mislead.
The gauge is also useful for spacing tucks and pleats evenly. Set the sliding marker to the distance between the tucks, and the gauge marks each fold in turn, so the spacing stays the same across the fabric. On a garment with a row of tucks, even spacing is what makes the row look deliberate rather than random, and the gauge is what makes it reliable. The same method works for marking the spacing of shirring or gathering, where the lines must be the same distance apart for the effect to look even.
A seam gauge is one of the cheapest tools in sewing, and one of the most used. It does a small job, measuring short distances accurately and repeatedly, and it does it better than any other tool in the sewing box.