The Seam Line How seams are made, finished, and fixed

Home / French Seam Pillowcase with a Cuff

French Seam Pillowcase with a Cuff

The cuff is the folded band at the open end of a pillowcase. It gives the opening a firm edge, a finished look, and a place to add a contrasting fabric.

What the Cuff Does

A cuff is a band of fabric folded over at the open end of the pillowcase, stitched in place so it lies flat. It strengthens the opening, which is the part of the case that is handled most, pulled on and off the pillow and gripped when the case is changed. Without a cuff, the open edge can curl, fray, or wear thin. With a cuff, the edge is firm, smooth, and neat.

The cuff also changes how the case looks. It frames the opening and gives the pillowcase a finished appearance on the bed, especially when the cuff is made from a contrasting fabric or pattern. A plain case with a contrasting cuff looks deliberate and complete, and the cuff is a simple way to add colour or pattern without complicating the rest of the project.

How Wide Should the Cuff Be

The cuff is usually a band several inches deep, folded so it shows as a flat strip at the open end. The depth is a matter of taste and proportion: a deeper cuff suits a larger pillowcase and gives a bolder look, while a narrower cuff suits a smaller case and looks more subtle. The cuff should be deep enough to fold neatly and to hold its shape, and it should be in proportion to the case, so it looks like part of the design rather than an afterthought.

A cuff that is too deep can flop forward and cover too much of the case, while a cuff that is too narrow can look like a hem rather than a design feature. Folding the fabric and holding it against the pillow before cutting gives a sense of the proportion, and a quick pin in place shows how the cuff will sit. The cuff depth can be adjusted at that stage, before any cutting is done, which is much easier than fixing it afterwards.

When measuring, the cuff depth is added to the length of the case, since the cuff extends beyond the body of the pillowcase. It is worth deciding the cuff depth before cutting, so the fabric is cut to the right total length. A cuff that is planned from the start will sit evenly and press flat, while one added as an afterthought can end up uneven.

Making the Cuff

There are two common ways to make a cuff. The first is to fold the case fabric itself at the open end, pressing the fold and stitching the inner edge of the band in place. This is the simplest method, since it uses the same fabric and needs no extra join. The second is to sew a separate band of fabric to the open end of the case, which allows a contrasting fabric and gives a cleaner edge, since the join can be enclosed in the French seam.

Whichever method is used, pressing is essential. The fold should be pressed sharply so the cuff lies flat, and the inner edge should be finished so no raw edge shows. If the cuff is made from a separate band, the band is sewn to the case before the side seams, so the join is enclosed and the cuff sits evenly. The cuff should be checked from the right side before the side seams are sewn, since a cuff that is uneven will show on the finished case.

The band itself should be cut with the grain straight, so the cuff does not twist once it is folded and pressed. A band cut off grain will pull to one side and the cuff will sit unevenly, with one end deeper than the other. Pressing the band before it is sewn to the case, and checking the fold against a ruler, keeps the cuff straight and even along its whole length.

Sewing the Cuff Into the Case

  1. Decide the cuff depth and add it to the length when cutting the fabric.
  2. If using a separate band, sew it to the open end of the case, right sides together.
  3. Press the join flat, then fold the cuff over to the right side and press the fold.
  4. Stitch the inner edge of the cuff in place, keeping the stitching straight and even.
  5. Sew the side seams with French seams, enclosing the cuff join inside the seam.
  6. Turn the case right side out and press the cuff flat, checking that it lies evenly.

Contrasting Cuffs and Details

A contrasting cuff is the simplest way to decorate a pillowcase. A different colour, a pattern, or a textured fabric can be used for the band, and it will show as a strip at the open end. The contrast should be chosen to suit the body of the case: a bold contrast makes a statement, while a subtle contrast in a similar tone looks quiet and neat. The cuff fabric should be similar in weight to the case fabric, so the two fold and press in the same way.

Small details can be added to the cuff, such as a row of topstitching along its inner edge, which holds the cuff flat and adds a finished line. Piping along the edge of the cuff is another option, though it adds work and bulk. For most cases, a plain cuff with neat stitching is enough, and the contrast of the fabric does the decorating.

A cuff is a small addition that makes a real difference. It strengthens the opening, finishes the look, and gives the pillowcase a touch of design, all for the cost of a fold and a row of stitching.