The Seam Line How seams are made, finished, and fixed

Home / Flat-Felled Seam vs Overlocked Seam

Flat-Felled Seam vs Overlocked Seam

A flat-felled seam and an overlocked seam both finish the raw edges, but they do it in different ways. One is folded and topstitched flat, the other is wrapped in thread by a serger.

How each seam is made

A flat-felled seam starts as a plain seam. One allowance is trimmed, the other is folded over it, the fold is pressed flat, and the seam is topstitched down. The result shows two rows of stitching on the right side and no raw edges anywhere. An overlocked seam also starts as a plain seam, but the edges are finished separately with an overlocker, which is a machine that wraps the edge in thread while trimming it. The overlocked edges can be pressed open or pressed to one side, and they stay visible on the wrong side, held by the loops of thread. The overlocked seam is sewn in two steps, the plain seam and the overlocking, though a serger can sew and finish in one pass on some fabrics. The flat-felled seam takes longer, because the folding and pressing are done by hand, while the overlocked seam is faster, because the machine does the finishing in one movement.

Strength and durability

The flat-felled seam is the stronger of the two. Its double stitching and folded layers spread the load, and the enclosed edges cannot fray, so the seam holds up to hard wear and frequent washing. That is why it is used on jeans, workwear and shirts that are worn often. An overlocked seam is strong enough for most garments, and the overlocking stops the edge from fraying, but the seam itself is a single row of stitching, and the edge is still exposed, even if it is wrapped in thread. Under hard wear, an overlocked edge can start to fray at the thread, and the seam can weaken. For a garment that will be washed many times and pulled hard, the flat-felled seam lasts longer. For a garment that is worn lightly and washed gently, the difference in durability may not matter, and the speed of overlocking may be more useful.

Look, feel and flatness

On the right side, a flat-felled seam shows two neat rows of topstitching, which become part of the design on jeans and work shirts. On the wrong side, it shows a smooth folded edge, with no thread loops to catch. An overlocked seam shows a single row of stitching on the right side, and on the wrong side it shows the wrapped edge, with loops of thread that can feel slightly raised. The flat-felled seam lies flatter, which matters on a garment worn close to the body, while an overlocked seam pressed to one side is flatter than one pressed open, but still not as flat as a folded seam. On a light fabric, the bulk of a flat-felled fold can show through, while an overlocked edge is lighter and less visible. On a heavy fabric, the flat-felled seam looks tidy and purposeful, while an overlocked edge can look unfinished by comparison. The choice depends on the fabric and on how visible the inside of the garment will be.

Speed, equipment and fabric choice

Overlocking needs a serger, or an overlock stitch on a sewing machine, while a flat-felled seam needs only a standard sewing machine, an iron and patience. That makes the flat-felled seam the easier choice for a sewist without a serger, though it takes longer per seam. Overlocking is faster once the machine is set up, and it suits production sewing, where many seams must be finished quickly. For fabric, the flat-felled seam suits stable wovens such as denim, cotton and linen, where the fold presses well. The overlocked seam suits a wider range of fabrics, including knits and fabrics that fray heavily, because the thread wrapping holds the edge without folding. On a sheer fabric, neither is ideal: a French seam is usually better. On a curved seam, overlocking is easier, because folding a flat-felled seam around a curve is difficult.

Which one to choose

Choose a flat-felled seam when strength, flatness and a clean inside matter most, and when there is time to fold and press. That covers jeans, workwear, shirts and other hard-wearing garments. Choose an overlocked seam when speed matters, when the fabric is a knit or frays heavily, or when the seam is curved and folding would be difficult. That covers many everyday garments, including dresses, tops and skirts in lighter fabrics. Some garments use both: flat-felled seams on the main structural seams, and overlocked finishes on the remaining seams. That combination gives strength where it is needed and speed where it is not. The decision is practical, not a matter of one seam being better in every case.

Cost and time are part of the comparison too. A flat-felled seam takes longer per seam, because the folding and pressing are done by hand, and that time adds up on a garment with many seams. An overlocked seam is faster, especially once the serger is threaded and set up, and that speed is why most ready-made garments use overlocking. For a single garment made at home, the extra time of a flat-felled seam is usually acceptable, and the result lasts longer. For a batch of garments, or for a garment with many seams, overlocking saves a lot of time, and the difference in durability may not matter if the garment is worn lightly. The choice is therefore about how the garment will be used, how many seams it has, and how much time is available, as well as about the fabric itself.

Both seams finish the raw edges, but they serve different needs. Pick the flat-felled seam for strength and flatness, pick the overlocked seam for speed and versatility, and match the choice to the fabric and the garment.