The Seam Line How seams are made, finished, and fixed

Home / Upholstery Seam Types

Upholstery Seam Types

Upholstery work uses only a handful of seam types, but each one suits a different job. Knowing which to use is the first step to a cover that holds together.

Plain Seams

A plain seam joins two layers right sides together with a single line of stitching, and the allowance is then pressed, trimmed, or stitched down. It is the simplest upholstery seam and the most common on flat panels that will not be seen, such as the back of a cushion or the inside of a cover. Its strength comes from the thread and the stitching, not from the structure of the seam itself, so it is often double-stitched on seams that take strain.

On visible panels, a plain seam can be topstitched, with a second row of stitching on the right side that holds the allowance flat and gives a neat finish. Topstitching also adds strength, since the second row shares the load. A plain seam is a good default, but it is not the best choice everywhere, especially on edges that will be rubbed or on very thick fabric where the allowance adds bulk.

Welt Seams

A welt seam, also called a piped seam, wraps a cord in a strip of fabric and sews that strip into the seam line. The cord gives the edge a firm, rounded shape and protects it from wear, which is why welting appears on cushion edges, chair arms, and seat bolsters. The cord also helps the seam keep its shape when the cover is pulled tight over padding.

Welt seams take more work than plain seams, since the cord strip is made first and then sewn between the two layers. The cord has to sit close to the stitching line and stay even along the whole seam, or the welt will look wavy. A zipper foot helps here, since it lets the needle stitch close to the cord. Welt seams suit medium and heavy fabrics best, and they are a standard feature on most upholstered furniture.

Lapped Seams

A lapped seam overlaps one layer over another and stitches through both, instead of joining them edge to edge. The overlap keeps the seam flat, which is useful where several layers meet or where a bulky fold would show. Lapped seams are common on leather and vinyl, where a folded allowance would be stiff and hard to press, and on panels where a low profile matters.

The strength of a lapped seam depends on the width of the overlap and the stitching that holds it. A narrow overlap with a single row of stitching can pull apart under strain, so lapped seams on upholstery are often stitched with two rows. The top layer can also be topstitched for a finished look, which adds a second line of holding power.

Double-Needle Seams

A double-needle seam sews two parallel rows of stitching at once, using two needles in the machine. The two rows share the load, so the seam is stronger than a single row, and they give a neat, even finish on visible seams. Double-needle seams are common on upholstery and on jeans, where a strong, tidy seam is part of the look.

The distance between the two rows is set by the needles and the machine, and it stays fixed along the seam, which keeps the finish consistent. Double-needle seams work best on straight or gently curved lines. On sharp curves the two rows can pull unevenly, so a single row is often better there. The seam is also useful for topstitching, since both rows are sewn in one pass.

French Seams and Enclosed Seams

A French seam encloses the raw edges inside a second fold of stitching, so no raw edge shows on either side. On upholstery fabric it gives a clean inside finish, and it is sometimes used on cushion covers and on seat backs where the inside will be seen. French seams add bulk, since the fabric is folded twice, so they suit lighter upholstery fabrics better than heavy ones.

Other enclosed seams, such as a bound seam, wrap the raw edge in a strip of fabric or tape. Bound seams are useful on thick fabric where a French seam would be too bulky, and on covers that will be handled often. The binding protects the edge from fraying and gives the inside of the cover a finished look.

Choosing Between Them

The choice starts with three questions: where does the seam sit, how much strain will it take, and how thick is the fabric. A hidden seam on a flat panel can be plain. An edge that will be rubbed needs welting. A thick join needs a lapped seam or a trimmed allowance. A visible seam that should look neat benefits from double-needle stitching or topstitching.

Testing the chosen seam on a scrap of the same fabric is always worth doing. The test shows whether the seam lies flat, whether the stitching suits the fabric, and whether the seam is strong enough for the job. A seam type that works on one fabric can fail on another, so the fabric, not habit, should decide.

Removable covers deserve a thought too. A cushion cover that comes off for washing needs seams that survive being turned inside out and pulled back on, which is a different kind of strain from sitting. An enclosed seam, such as a French seam or a bound seam, keeps the raw edges tidy through repeated washing, while a plain seam with a raw edge will fray faster. On a fixed cover that is never removed, a plain seam with a finished edge is usually enough, since the inside is never handled after the cover is fitted.