The Seam Line How seams are made, finished, and fixed

Home / Flat-Felled Seam Topstitching

Flat-Felled Seam Topstitching

Topstitching is the final step of a flat-felled seam, and it is the step that shows. It holds the fold flat, and its two rows on the right side are the visible sign of the seam.

What the topstitching does

The topstitching on a flat-felled seam has two jobs. First, it holds the folded allowance down, so the seam stays flat and the raw edges stay enclosed. Without it, the fold would open in wear and in the wash. Second, it gives the seam its look: two parallel rows of stitching on the right side, one from the original seam and one from the topstitching itself. Those rows should be straight, evenly spaced and consistent in length, because they are visible on the finished garment. On jeans, the topstitching is a design feature, often in a contrasting thread. On a shirt, it is usually matched to the fabric, so it reads as a neat line rather than a decoration. In both cases, the stitching needs to be secure, since it carries the load of holding the fold. A row that skips or wanders weakens the seam and spoils the look at the same time.

Stitch length and thread

Stitch length for topstitching is usually a little longer than for a plain seam, because the topstitching passes through several layers and needs to look even. A stitch that is too short can pucker the fabric or perforate it, especially on a light cloth, while a stitch that is too long may look loose and may not hold the fold firmly. The right length depends on the fabric: a fine cotton shirt may need a shorter stitch than heavy denim, and a test on scrap shows which length looks best. Thread choice matters too. A thread that matches the fabric keeps the topstitching subtle, while a contrasting thread makes it a feature. On jeans, a heavier topstitching thread is often used, because it shows clearly and holds well on denim. On a shirt, a standard thread in a matching colour is usually enough. Use the same thread in the bobbin as on the top, or a matching colour, so the underside of the seam looks tidy as well.

How to topstitch the seam

  1. Press the fold flat first, from the wrong side and then from the right side, so the folded edge is straight and the seam lies flat before any stitching starts.
  2. Place the work under the presser foot with the right side up, and line up the folded edge with the edge of the presser foot or with a seam guide, so the stitching will run a consistent distance from the fold.
  3. Sew slowly and steadily, keeping the folded edge as the guide, and let the feed dogs move the fabric rather than pulling it from behind.
  4. At a join or a thick spot, slow down further, and turn the handwheel for a few stitches if the machine struggles, rather than forcing the fabric through.
  5. Check the stitching from the right side as you go, and stop to reposition the fabric if the fold starts to drift, instead of trying to steer it back while sewing.
  6. Press the finished seam once more, from the right side, and check that both rows are straight and that the fold is fully caught by the topstitching.

Keeping the rows straight and even

Straight topstitching comes from a good guide and a steady speed, not from watching the needle. Use the edge of the presser foot, a seam guide, or a line of tape on the machine bed as a reference, and keep the folded edge against that reference. Look ahead of the needle, at the fold and the guide, rather than at the needle itself, since that gives more warning when the fold starts to drift. Sew at a moderate speed, and slow down on curves or at joins. If the fabric is slippery, pins or clips placed close together along the fold stop it shifting. If the fabric is thick, a walking foot can help the layers feed evenly. A topstitching needle, with a larger eye, can help a heavier thread pass through the fabric without fraying. Test the guide, the stitch length and the thread on a scrap folded in the same way, and adjust before sewing the garment.

Fixing topstitching that goes wrong

If the topstitching drifts away from the folded edge, unpick it and re-sew, rather than adding a second row to cover the mistake, since a second row only makes the seam look busier. If the stitching misses the fold in places, the fold was probably not pressed flat enough, or it shifted under the foot, so re-press and re-pin before redoing it. If the stitches skip on thick fabric, try a heavier needle and a slightly longer stitch on scrap. If the fabric puckers along the topstitching, the tension may be too high, or the stitch may be too short, so test a lower tension and a longer stitch. If the thread breaks, check that the needle is suited to the thread and that the thread path is clear. Unpicking topstitching takes care, since the stitches are visible, so use a seam ripper gently and support the fabric flat while working.

Thread colour deserves a test on scrap, especially on jeans and on dark fabrics. A thread that looks right on the spool can look different once it is stitched into the fabric, because the surrounding cloth changes how the colour reads. On a shirt, a thread that matches the fabric exactly can disappear, which is usually the aim, while a thread that is one shade darker will show as a clear line. On jeans, a gold thread on indigo denim is a classic pairing, but the shade of gold matters, and a test shows whether it is too bright or too dull for the cloth. Stitch a short length on scrap, press it, and look at it in daylight before choosing the thread for the garment. That test is quicker than unpicking a row of topstitching that does not look right.

Topstitching is where a flat-felled seam is judged, because it is the part that shows. Press the fold first, use a guide, sew steadily, and test on scrap, and the two rows will sit straight and hold the seam flat.